Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
2
- Battery
- 3 steps
- RAM
- 3 steps
Flags
0
BackAsus G750JW-BBI7N05
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Power off and unplug your laptop, then turn it over.
Power off and unplug your laptop, then turn it over.
1024
Step 2
- Slide the battery release latch all the way to the right. This will cause the battery to “pop” out slightly.
Slide the battery release latch all the way to the right. This will cause the battery to “pop” out slightly.
Step 3
- Remove the battery from its compartment.
Remove the battery from its compartment.
Step 4
RAM
- Lift up the rubber stopper on the backplate to expose one Phillips screw. Unscrew it until it becomes loose.
- This screw is permanently connected to the backplate and cannot be removed. Unscrewing it only allows you to remove the backplate from the laptop.
- The backpate is the plastic plate on the underside of the laptop that covers some of its easily accessible internal components.
Lift up the rubber stopper on the backplate to expose one Phillips screw. Unscrew it until it becomes loose.
This screw is permanently connected to the backplate and cannot be removed. Unscrewing it only allows you to remove the backplate from the laptop.
The backpate is the plastic plate on the underside of the laptop that covers some of its easily accessible internal components.
Step 5
- Use an opening tool to pry up the backplate along its edges, then remove it.
- You may need to apply some force when prying up the backplate.
- Keep in mind: During reassembly, replace the backplate starting from the bottom.
Use an opening tool to pry up the backplate along its edges, then remove it.
You may need to apply some force when prying up the backplate.
Keep in mind: During reassembly, replace the backplate starting from the bottom.
Step 6
- During the recycling process, this laptop lost some of its parts. In this step, its top two RAM modules are missing.
- Remove each RAM module one at a time by sliding them downward out of their slots.
During the recycling process, this laptop lost some of its parts. In this step, its top two RAM modules are missing.
Remove each RAM module one at a time by sliding them downward out of their slots.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Stephanie Asling
Member since: 10/05/2017
424 Reputation
2 Guides authored
Badges:
12
+9 more badges
Team
Portland State University, Team S1-G1, Read Fall 2017
Member of Portland State University, Team S1-G1, Read Fall 2017
PSUN-READ-F17S1G1
2 Members
3 Guides authored
Latiron London - Oct 20, 2018
Reply
What about how to remove the other two internal RAM Modules?