Asus G75Vw Bhi7N07 Optical Drive Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Optical Drive
4 steps

Flags

BackAsus G75VW-BHI7N07
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Optical Drive

If you have power, press the eject button.
If you don’t have power, use the opening tool to pry off the disk drive cover.
Press the Manual Eject button with the spudger and the disk drive should slide out. (Might need tweezers if it doesn’t pop out immediately)
Once the disc drive pops out, flip the laptop over.

If you have power, press the eject button.

If you don’t have power, use the opening tool to pry off the disk drive cover.

Press the Manual Eject button with the spudger and the disk drive should slide out. (Might need tweezers if it doesn’t pop out immediately)

Once the disc drive pops out, flip the laptop over.

1024

Step 2

Remove the 4 screws that hold down the metal plate with the J0 Phillips-head screwdriver.
Put the screws onto the magnetic pad, to avoid losing any.
Lift the metal plate off the optical drive with your fingers.

Remove the 4 screws that hold down the metal plate with the J0 Phillips-head screwdriver.

Put the screws onto the magnetic pad, to avoid losing any.

Lift the metal plate off the optical drive with your fingers.

Step 3

Remove 3 screws of disc drive with the J0 Phillips-head screwdriver.
Pick up the disc drive assembly and pull it out.

Remove 3 screws of disc drive with the J0 Phillips-head screwdriver.

Pick up the disc drive assembly and pull it out.

Step 4

Remove optical assembly by hand.
Remove disc reader by removing 2 bolts from the top using the J0 Phillips-head screwdriver.
Lift the metal piece out.
Make sure no edges are sticking out when putting the metal plate back in place.

Remove optical assembly by hand.

Remove disc reader by removing 2 bolts from the top using the J0 Phillips-head screwdriver.

Lift the metal piece out.

Make sure no edges are sticking out when putting the metal plate back in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

Joy

Member since: 09/08/2017

431 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Western Carolina University, Team S1-G1, Virtue Fall 2017                        

                                                  Member of Western Carolina University, Team S1-G1, Virtue Fall 2017 



                    WCU-VIRTUE-F17S1G1                     


                                            3 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team