Difficulty

Moderate

Steps

9

Time Required

                          10 - 20 minutes

Sections

2

  • Optical Drive
  • 3 steps
  • Battery
  • 6 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Missed a Step

Oops! This guide is currently missing some important steps.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackASUS GL752VW-DH74

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Optical Drive
  • Begin by putting the needle into the hole in the disk tray.

Begin by putting the needle into the hole in the disk tray.

1024

Step 2

  • Use the spudger to help ease out the disk drive.

Use the spudger to help ease out the disk drive.

Step 3

  • Pull out disk tray entirely.

Pull out disk tray entirely.

Step 4

              Battery
  • Remove the 3 small screws located underneath the disk drive.

Remove the 3 small screws located underneath the disk drive.

Step 5

  • Unscrew the nine remaining 8 mm Phillips-head screws on the back of the device.

Unscrew the nine remaining 8 mm Phillips-head screws on the back of the device.

Step 6

  • Use the opening tool to pry the back of the laptop case from the top

Use the opening tool to pry the back of the laptop case from the top

Step 7

  • Disconnect the 3 cables connecting the motherboard to the keyboard.

Disconnect the 3 cables connecting the motherboard to the keyboard.

Step 8

  • Unscrew the two 8mm screws attached to the battery

Unscrew the two 8mm screws attached to the battery

Step 9

  • Disconnect the bundled cable connector and remove the battery.

Disconnect the bundled cable connector and remove the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      18 other people completed this guide.

Author

                                      with 2 other contributors 


                    Maxwell Seibert

Member since: 10/27/2017

807 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       UMass Dartmouth, Team S1-G3, Isaacson Fall 2017                        

                                                  Member of UMass Dartmouth, Team S1-G3, Isaacson Fall 2017 



                    UMASSD-ISAACSON-F17S1G3                     


                                            3 Members                     


                                            5 Guides authored

KN-IL - May 30, 2018

Reply

Step3 Remove Screw next to the serial label in order to remove the disk tray.

Step 5 Hard Drive screws case screws have to also be removed in addition to the screw below the internal clock battery

Great Guide Thank you !!! - Battery Model for GL 752VW-dh51 A41N1501

Vio Belc - Sep 25, 2018

Reply

Despite the few missing “unscrew” steps, it REALLY helped me. It took quite a bit longer than 20 min as I did not want to wreck something, but overall I could not have changed my battery without this guide. THANK YOU!

angel - Nov 20, 2018

Reply

Thank you for your help, I now know how to change the battery, I tried disconnecting and reconnecting it see if I would get any power at all but zip, I will look on Ebay to try and buy a battery for it but I hope it’s that as it was working fine then said battery had no charge when I always made sure it never ran out so not sure what the problem was, at first I thought it was the chord but wasn’t that as I changed it.

snamjoshi - Jun 27, 2019

Reply

Iain Halliwell - Dec 31, 2020

Reply

Dont forget to put the three screws back in the frame prior to putting the optical drive back in and dont forget to put the battery screws back in, other than that a great guide.