Asus Gtx 750 Gpu Fan Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          30 - 45 minutes            

Sections

1

• Asus GTX 750 GPU Fan
• 6 steps

Flags

5

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackCustom Built Desktop PC

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Asus GTX 750 GPU Fan               

• Before starting the procedure, make sure the workspace is neat and clean so that parts of the case do not go missing.
• Put the case in a position such that the power button is on your right corner. Next, push the top panel’s ridgeline away to slide the case off. Similarly, continue this process to lift off the side panel’s case that was facing you.

Before starting the procedure, make sure the workspace is neat and clean so that parts of the case do not go missing.

Put the case in a position such that the power button is on your right corner. Next, push the top panel’s ridgeline away to slide the case off. Similarly, continue this process to lift off the side panel’s case that was facing you.

1024

Step 2

• For this step, we will disconnect the GPU cable. We will do that with our thumb and index finger which will unhook the hooking device. Later, we can pull the cable away from the case.(However Asus GTX750 is powered only by the motherboard, so we will skip this step on this model)
• On the PCIe slot of the graphic card, you will see a release mechanism that you should push gently and carefully. After pushing it down, you will hear a clicking sound which signifies the correct release from the motherboard. Be careful and don’t touch the motherboard with your hands as it may cause a short.

For this step, we will disconnect the GPU cable. We will do that with our thumb and index finger which will unhook the hooking device. Later, we can pull the cable away from the case.(However Asus GTX750 is powered only by the motherboard, so we will skip this step on this model)

On the PCIe slot of the graphic card, you will see a release mechanism that you should push gently and carefully. After pushing it down, you will hear a clicking sound which signifies the correct release from the motherboard. Be careful and don’t touch the motherboard with your hands as it may cause a short.

Step 3

• Finally we are working on the GPU unit.
• Disconnect the 4-pin fan power/speed control cable from the circuit board.

Finally we are working on the GPU unit.

Disconnect the 4-pin fan power/speed control cable from the circuit board.

Step 4

• Remove the 4 small screws holding the fan shroud in place by using a (Phillips #00) screwdriver between the fan blades and supporting bracket

Remove the 4 small screws holding the fan shroud in place by using a (Phillips #00) screwdriver between the fan blades and supporting bracket

Step 5

• locate the 2 clips of the fan shroud on both sides and pull them slightly to the side to release it straight up from the heatsink

locate the 2 clips of the fan shroud on both sides and pull them slightly to the side to release it straight up from the heatsink

Step 6

• Congratulations!! you have finished the hardest part and now we will be reversing the disassembly process to fit our new fan shroud replacement back on the unit

Congratulations!! you have finished the hardest part and now we will be reversing the disassembly process to fit our new fan shroud replacement back on the unit

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Zhiming Lin                     

Member since: 09/26/2022

145 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       York University, Team A-4, Morris Fall 2022                        

                                                  Member of York University, Team A-4, Morris Fall 2022 



                    YORK-MORRIS-F22SAG4                     


                                            4 Members                     


                                            1 Guide authored