Asus K200Ma Ds01T Keyboard Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          7 - 10 minutes

Sections

Back Panel
4 steps
Keyboard
2 steps

Flags

BackASUS K200MA-DS01T
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

With the opening facing you, flip the laptop over and remove the following screws from the back panel:
Six 4mm Phillips screws using a Phillips #0 screwdriver.
One 12mm Phillips screw in the center using a Phillips #0 screwdriver.

With the opening facing you, flip the laptop over and remove the following screws from the back panel:

Six 4mm Phillips screws using a Phillips #0 screwdriver.

One 12mm Phillips screw in the center using a Phillips #0 screwdriver.

1024

Step 2

Using a plastic spudger, remove the two rubber stoppers closest to the hinge to reveal the screws underneath.

Using a plastic spudger, remove the two rubber stoppers closest to the hinge to reveal the screws underneath.

Step 3

Remove the following screws:
Two 4mm Phillips screws using a Phillips #0 screwdriver.

Remove the following screws:

Two 4mm Phillips screws using a Phillips #0 screwdriver.

Step 4

Using a plastic spudger (and a fair amount of force), pry the back panel up from the keyboard to separate.
You may have to use one spudger to wedge between the back panel and keyboard while using another to pry it open in a different spot.

Using a plastic spudger (and a fair amount of force), pry the back panel up from the keyboard to separate.

You may have to use one spudger to wedge between the back panel and keyboard while using another to pry it open in a different spot.

Step 5

              Keyboard

To disconnect the keyboard connectors from keyboard and back panel, gently pull wide keyboard connector out.
Gently pull the narrow connector away from the keyboard.

To disconnect the keyboard connectors from keyboard and back panel, gently pull wide keyboard connector out.

Gently pull the narrow connector away from the keyboard.

Step 6

Now that the keyboard connectors are unplugged, pull the keyboard off and away from the back panel hinges.

Now that the keyboard connectors are unplugged, pull the keyboard off and away from the back panel hinges.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Aliyah Malapit

Member since: 09/26/2018

199 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       CSU Fullerton, Team S2-G5, Bruce Fall 2018                        

                                                  Member of CSU Fullerton, Team S2-G5, Bruce Fall 2018 



                    CSUF-BRUCE-F18S2G5                     


                                            4 Members                     


                                            7 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team