Difficulty

Moderate

Steps

8

Time Required

                          15 minutes

Sections

2

  • Battery
  • 3 steps
  • RAM
  • 5 steps

Flags

0

  • BackASUS K53E-BBR1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the laptop over so you can see the battery.

Flip the laptop over so you can see the battery.

1024

Step 2

  • Slide the lock on the right side of the battery to the right. If done correctly the slider will stay in place and there will be a red indicator.

Slide the lock on the right side of the battery to the right. If done correctly the slider will stay in place and there will be a red indicator.

Step 3

  • Slide the other sliding lock on the left side of the battery to the left, and with your other hand slide the battery out from the laptop.

Slide the other sliding lock on the left side of the battery to the left, and with your other hand slide the battery out from the laptop.

Step 4

              RAM
  • Remove the two 4mm Phillips #0 screws located on the opposite ends of the laptop.

Remove the two 4mm Phillips #0 screws located on the opposite ends of the laptop.

Step 5

  • Slide the back panel backwards until it stops.
  • You can now lift the panel up and out of the laptop casing.

Slide the back panel backwards until it stops.

You can now lift the panel up and out of the laptop casing.

Step 6

  • The RAM is now visible.
  • Remove the RAM by pressing out on both tabs visible on each side of the RAM.
  • To work the tabs, take your finger tips and press outwards from the indents on the RAM.

The RAM is now visible.

Remove the RAM by pressing out on both tabs visible on each side of the RAM.

To work the tabs, take your finger tips and press outwards from the indents on the RAM.

Step 7

  • The RAM is now angled up and you can remove the RAM by pulling it out in the direction it is facing.
  • Gently Pull the RAM out of its connector without pushing down or pulling up.

The RAM is now angled up and you can remove the RAM by pulling it out in the direction it is facing.

Gently Pull the RAM out of its connector without pushing down or pulling up.

Step 8

  • Repeat the previous two steps for the second stick of RAM.

Repeat the previous two steps for the second stick of RAM.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    William Colangelo

Member since: 03/25/2019

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team S6-G4, Peak Spring 2019                        

                                                  Member of UMass Dartmouth, Team S6-G4, Peak Spring 2019 



                    UMASSD-PEAK-S19S6G4                     


                                            3 Members                     


                                            4 Guides authored