Difficulty

Easy

Steps

9

Time Required

                          5 minutes            

Sections

3

  • Battery
  • 4 steps
  • Rear Panel
  • 2 steps
  • RAM
  • 3 steps

Flags

0

  • BackAsus K55N-DS81

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Flip the laptop over, such that the bottom of the laptop is facing upwards.
  • Ensure that the laptop is powered off prior to following this guide.

Flip the laptop over, such that the bottom of the laptop is facing upwards.

Ensure that the laptop is powered off prior to following this guide.

1024

Step 2

  • Pull the latch to the right of the battery to the right.

Pull the latch to the right of the battery to the right.

Step 3

  • Pull the latch to the left of the battery to the left. Hold the latch open with a finger to prevent it from closing.

Pull the latch to the left of the battery to the left. Hold the latch open with a finger to prevent it from closing.

Step 4

  • While holding the second latch from the previous step, use another hand to reach underneath the battery.
  • Pull the battery upwards and away from the laptop to remove it.

While holding the second latch from the previous step, use another hand to reach underneath the battery.

Pull the battery upwards and away from the laptop to remove it.

Step 5

              Rear Panel               
  • Using a JIS #00 screwdriver, unscrew the two 5 mm screws on either side of the laptop panel.

Using a JIS #00 screwdriver, unscrew the two 5 mm screws on either side of the laptop panel.

Step 6

  • Remove the panel by pushing away from the laptop until the panel is free of the laptop.
  • Lift to remove the panel.

Remove the panel by pushing away from the laptop until the panel is free of the laptop.

Lift to remove the panel.

Step 7

              RAM               
  • Lift up the plastic static shield atop the RAM slots.

Lift up the plastic static shield atop the RAM slots.

Step 8

  • Depress the tongs on either side of the RAM stick to loosen the RAM from the slot.

Depress the tongs on either side of the RAM stick to loosen the RAM from the slot.

Step 9

  • Grab the RAM and pull away from the slot to release it.

Grab the RAM and pull away from the slot to release it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Elliott Beckner                     

Member since: 11/05/2018

543 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       IUPUI, Team S2-G1, Baechle Fall 2018                        

                                                  Member of IUPUI, Team S2-G1, Baechle Fall 2018 



                    IUPUI-BAECHLE-F18S2G1                     


                                            4 Members                     


                                            5 Guides authored