Difficulty
Moderate
Steps
4
Time Required
20 minutes
Sections
1
- Swivel Camera
- 4 steps
Flags
0
BackASUS M51E-B2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Swivel Camera
- Open the laptop.
- Press and hold the power button until the laptop powers off.
Open the laptop.
Press and hold the power button until the laptop powers off.
1024
Step 2
- Use a metal spudger prying tool to remove the outer screen cover of the laptop.
- Gently work your way clockwise around the outer part of the screen.
Use a metal spudger prying tool to remove the outer screen cover of the laptop.
Gently work your way clockwise around the outer part of the screen.
Step 3
- Use the Phillips PH0 head screwdriver to remove the two 2.5 mm screws located on the left side of the camera.
- Use the Phillips PH0 head screwdriver to remove the one 2.5 millimeter screw that goes through the left side of the camera.
Use the Phillips PH0 head screwdriver to remove the two 2.5 mm screws located on the left side of the camera.
Use the Phillips PH0 head screwdriver to remove the one 2.5 millimeter screw that goes through the left side of the camera.
Step 4
- Find the wiring harness on the right side of the camera.
- Using your fingers, gently remove the wiring harness connected to the right side of the camera.
Find the wiring harness on the right side of the camera.
Using your fingers, gently remove the wiring harness connected to the right side of the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Juston Brown
Member since: 09/21/2018
344 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
University of North Texas, Team S8-G2, Riccardelli Fall 2018
Member of University of North Texas, Team S8-G2, Riccardelli Fall 2018
UNT-RICCARDELLI-F18S8G2
4 Members
4 Guides authored