Difficulty

Moderate

Steps

15

Time Required

                          30 minutes

Sections

3

  • Back Panel
  • 3 steps
  • Speakers
  • 7 steps
  • Motherboard
  • 5 steps

Flags

0

  • BackAsus MeMo Pad 10 ME102A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel
  • Insert the blue plastic opening tool into the seam between the back panel and the chassis.
  • When removing the back panel, remember to keep the device face down on a flat surface in order to prevent dropping the device or anything inside of the device.

Insert the blue plastic opening tool into the seam between the back panel and the chassis.

When removing the back panel, remember to keep the device face down on a flat surface in order to prevent dropping the device or anything inside of the device.

1024

Step 2

  • Slide the plastic opener around the tablet. There will be spots of resistance. These should gently pop open as the tool slides through the seam.

Slide the plastic opener around the tablet. There will be spots of resistance. These should gently pop open as the tool slides through the seam.

Step 3

  • After all of the clips have been opened, the back panel should be free to remove by hand

After all of the clips have been opened, the back panel should be free to remove by hand

Step 4

              Speakers
  • The right-hand speaker is labeled ME102A-R and is located by the battery plug. This is the first speaker removed in this guide, however if the left-hand speaker is the only one you need to replace please skip down to the left-hand speaker section.
  • Unplug the speaker cable by gently pushing it parallel to the motherboard with the flat side of the blue plastic opening tool.

The right-hand speaker is labeled ME102A-R and is located by the battery plug. This is the first speaker removed in this guide, however if the left-hand speaker is the only one you need to replace please skip down to the left-hand speaker section.

Unplug the speaker cable by gently pushing it parallel to the motherboard with the flat side of the blue plastic opening tool.

Step 5

  • Unscrew the M2x4mm screw with the PH00 screwdriver attachment.

Unscrew the M2x4mm screw with the PH00 screwdriver attachment.

Step 6

  • Lift the speaker up by the end opposing the steel latch and slide it out from under the steel latch. The speaker has now been removed.

Lift the speaker up by the end opposing the steel latch and slide it out from under the steel latch. The speaker has now been removed.

Step 7

  • The left-hand speaker is designated by the lettering ME102A-L and is located by the silver and blue ribbon cable running across the top of the battery.
  • Remove the Ribbon cable labeled CN2 by gently prying up the white latch of the black and white plugs by using the small blue plastic opening tool.
  • Remove the Ribbon cable labeled CN1 by gently prying up the white latch of the black and white plugs by using the small blue plastic opening tool.

The left-hand speaker is designated by the lettering ME102A-L and is located by the silver and blue ribbon cable running across the top of the battery.

Remove the Ribbon cable labeled CN2 by gently prying up the white latch of the black and white plugs by using the small blue plastic opening tool.

Remove the Ribbon cable labeled CN1 by gently prying up the white latch of the black and white plugs by using the small blue plastic opening tool.

Step 8

  • Unplug the speaker cable by gently pushing it parallel to the motherboard with the flat side of the blue plastic opening tool.

Step 9

Step 10

Step 11

              Motherboard
  • Use the blue plastic opening tool to lift open the black latch connecting the blue ribbon cable to the motherboard.

Use the blue plastic opening tool to lift open the black latch connecting the blue ribbon cable to the motherboard.

Step 12

  • Using the blue plastic opening tool unplug the battery plug by gently pushing the plug out parallel to the motherboard.

Using the blue plastic opening tool unplug the battery plug by gently pushing the plug out parallel to the motherboard.

Step 13

  • Using the PH00 screwdriver, remove the 4 black M2x4mm screws along the bottom of the motherboard.

Using the PH00 screwdriver, remove the 4 black M2x4mm screws along the bottom of the motherboard.

Step 14

  • Using the PH00 screwdriver, remove the 2 silver M2x2mm screws along the top of the motherboard.

Using the PH00 screwdriver, remove the 2 silver M2x2mm screws along the top of the motherboard.

Step 15

  • Lift the motherboard gently from both sides.

Lift the motherboard gently from both sides.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    Andreas Niederer

Member since: 09/15/2016

387 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 11-3, Blackwell Fall 2016                        

                                                  Member of USF Tampa, Team 11-3, Blackwell Fall 2016 



                    USFT-BLACKWELL-F16S11G3                     


                                            4 Members                     


                                            10 Guides authored

nielsnbc - May 30, 2018

Reply

super flot hjælp tak tusinde gange