Asus Memo Pad 7 Me170C Microphone Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          7 minutes

Sections

Microphone
4 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

BackAsus MeMO Pad 7 ME170C
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Microphone

Before beginning to dissemble, power off the device.
Excessive force can result in damaged or cracked screen. Be Gentle.
Using the Jimmy tool, gently wedge it into the seam of the device.
Gently pry the Jimmy tool all around the seam until the back panel is detached.

Before beginning to dissemble, power off the device.

Excessive force can result in damaged or cracked screen. Be Gentle.

Using the Jimmy tool, gently wedge it into the seam of the device.

Gently pry the Jimmy tool all around the seam until the back panel is detached.

1024

Step 2

Inserted in a black port on the motherboard, locate the white cable connector on the left side of the tablet.
In a side to side motion, using the smallest opening tool, slide the white cable box completely out of the port towards the bottom of the device.

Inserted in a black port on the motherboard, locate the white cable connector on the left side of the tablet.

In a side to side motion, using the smallest opening tool, slide the white cable box completely out of the port towards the bottom of the device.

Step 3

Pull the wire out of its tracking panel gently.
Note: This wire should be fairly easy to pull out of the panel.

Pull the wire out of its tracking panel gently.

Note: This wire should be fairly easy to pull out of the panel.

Step 4

Note: The end of the wire is attached to a small taped black box.
Using wide nosed tweezers, lift up the tape and remove from black box.
Note: Black box will loosen up once the tape is removed.
Remove the component completely from the device.

Note: The end of the wire is attached to a small taped black box.

Using wide nosed tweezers, lift up the tape and remove from black box.

Note: Black box will loosen up once the tape is removed.

Remove the component completely from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors

                    Tatiana Schneider

Member since: 10/04/2015

596 Reputation

                                      4 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       Eastern Washington University, Team 2-3, Plummer Fall 2015                        

                                                  Member of Eastern Washington University, Team 2-3, Plummer Fall 2015 



                    EWU-PLUMMER-F15S2G3                     


                                            5 Members                     


                                            9 Guides authored

Needs Better Images#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Needs Better Images

Introduction

What you need

Team