Difficulty

Moderate

Steps

4

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 3 steps
  • Power and Volume Button
  • 1 step

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackAsus MeMO Pad 7 ME170C

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before beginning to disassemble, Power off the device.
  • Excessive force can result in damaged or cracked screen. Be Gentle.
  • Gently wedge a Jimmy into the seam of the device.
  • Gently pry the Jimmy all around the seam until the back panel is detached.

Before beginning to disassemble, Power off the device.

Excessive force can result in damaged or cracked screen. Be Gentle.

Gently wedge a Jimmy into the seam of the device.

Gently pry the Jimmy all around the seam until the back panel is detached.

1024

Step 2

  • Locate the black bundle cable connector attached to the battery of the phone.
  • Do not push down. Slide in a forward motion to avoid breaking any inner pieces.
  • Using a plastic opening tool, gently slide the black bundle cable connector towards the battery in a back and forth motion until loosened and it slides out of connection port.

Locate the black bundle cable connector attached to the battery of the phone.

Do not push down. Slide in a forward motion to avoid breaking any inner pieces.

Using a plastic opening tool, gently slide the black bundle cable connector towards the battery in a back and forth motion until loosened and it slides out of connection port.

Step 3

  • Using a plastic opening tool, pry out the batteries to loosen them out.
  • The battery will be pried out of its port.
  • Lift the battery out of its port

Using a plastic opening tool, pry out the batteries to loosen them out.

The battery will be pried out of its port.

Lift the battery out of its port

Step 4

              Power and Volume Button
  • Locate the cable that connects the power button to the motherboard.
  • Carefully lift and release the connector lock that keeps it attached the motherboard. The connector lock rotates up away from the connection to release.
  • Carefully release the connection from the motherboard.
  • Gently pry the power and volume button away from the case. There should not be much resistance when prying the button off.

Locate the cable that connects the power button to the motherboard.

Carefully lift and release the connector lock that keeps it attached the motherboard. The connector lock rotates up away from the connection to release.

Carefully release the connection from the motherboard.

Gently pry the power and volume button away from the case. There should not be much resistance when prying the button off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Thomas Brooks

Member since: 03/04/2017

301 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       IUPUI, Team S3-G3, Wilson Spring 2017                        

                                                  Member of IUPUI, Team S3-G3, Wilson Spring 2017 



                    IUPUI-WILSON-S17S3G3                     


                                            5 Members                     


                                            6 Guides authored