Difficulty

Moderate

Steps

12

Time Required

                          20 minutes

Sections

1

  • LCD Screen Assembly
  • 12 steps

Flags

0

  • BackAsus MeMO Pad 7 ME176C

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Screen Assembly
  • Insert plastic opening tool in between screen and back cover to create initial separation between the two.
  • Then run plastic opening tool along end of screen to fully separate back cover from screen.

Insert plastic opening tool in between screen and back cover to create initial separation between the two.

Then run plastic opening tool along end of screen to fully separate back cover from screen.

1024

Step 2

  • Remove screws (2.6mm) connecting speaker to hard frame with Phillips head screw driver (PH000).

Remove screws (2.6mm) connecting speaker to hard frame with Phillips head screw driver (PH000).

Step 3

  • Disconnect speaker wire from motherboard using metal pronged tweezers.

Disconnect speaker wire from motherboard using metal pronged tweezers.

Step 4

  • Remove the screws (2.6mm) connecting the motherboard and battery tray to the hard frame with Phillip’s head screw driver (PH000).

Remove the screws (2.6mm) connecting the motherboard and battery tray to the hard frame with Phillip’s head screw driver (PH000).

Step 5

  • Remove the black bundle battery connector from the motherboard using plastic opening tools.

Remove the black bundle battery connector from the motherboard using plastic opening tools.

Step 6

  • Use plastic opener tool to disconnect ZIF connectors as shown.

Use plastic opener tool to disconnect ZIF connectors as shown.

Step 7

  • Remove speaker housing to expose ZIF connection underneath.
  • Then using metal tweezers disconnect the ZIF connector.

Remove speaker housing to expose ZIF connection underneath.

Then using metal tweezers disconnect the ZIF connector.

Step 8

  • Remove display and button connections from motherboard using metal tweezers.

Remove display and button connections from motherboard using metal tweezers.

Step 9

  • Remove unscrewed battery tray from main frame.

Remove unscrewed battery tray from main frame.

Step 10

  • Remove motherboard from hard frame.
  • When removing the motherboard make sure all screws that attach motherboard to hardframe are removed and to release plastic tab as shown in image.

Remove motherboard from hard frame.

When removing the motherboard make sure all screws that attach motherboard to hardframe are removed and to release plastic tab as shown in image.

Step 11

  • Peel off button sensors off the side of the hard frame.

Peel off button sensors off the side of the hard frame.

Step 12

  • Apply slight pressure on camera to break adhesive to finish screen disassembly processes.

Apply slight pressure on camera to break adhesive to finish screen disassembly processes.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Nejad Harara

Member since: 09/26/2017

110 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Cal Poly, Team S6-G3, Banghart Fall 2017                        

                                                  Member of Cal Poly, Team S6-G3, Banghart Fall 2017 



                    CPSU-BANGHART-F17S6G3                     


                                            5 Members                     


                                            9 Guides authored