Difficulty

Easy

Steps

6

Time Required

                          10 - 15 minutes            

Sections

2

  • Rear Panel
  • 3 steps
  • Battery
  • 3 steps

Flags

0

  • BackAsus MeMO Pad 7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Panel               
  • Make sure your device is turned off. Then with a plastic opening tool, carefully remove the back panel by carefully working your way around the perimeter.
  • The panel will be glued on and requires pressure to open.

Make sure your device is turned off. Then with a plastic opening tool, carefully remove the back panel by carefully working your way around the perimeter.

The panel will be glued on and requires pressure to open.

1024

Step 2

  • After removing the rear panel, use a plastic openning tool to remove the frame of the tablet.
  • Start in the middle of the top side and insert a plastic opening tool between the screen and the frame.
  • Carefully run the plastic opening tool along all the edges of the tablet.

After removing the rear panel, use a plastic openning tool to remove the frame of the tablet.

Start in the middle of the top side and insert a plastic opening tool between the screen and the frame.

Carefully run the plastic opening tool along all the edges of the tablet.

Step 3

  • When you take the rear panel and the frame out, place the rear panel and the frame away from the device.

When you take the rear panel and the frame out, place the rear panel and the frame away from the device.

Step 4

              Battery               
  • Disconnect the ZIF connectors to release the data cables holding the battery in. Use tweezers to do this.
  • You can also use your hand to remove ZIF connectors.
  • ZIF connectors are delicate so be careful when you are removing them.

Disconnect the ZIF connectors to release the data cables holding the battery in. Use tweezers to do this.

You can also use your hand to remove ZIF connectors.

ZIF connectors are delicate so be careful when you are removing them.

Step 5

  • Find the place where the battery connector is. Disconnect the battery connectors by carefully pulling up on them using a spudger or plastic opening tool.

Find the place where the battery connector is. Disconnect the battery connectors by carefully pulling up on them using a spudger or plastic opening tool.

Step 6

  • Using a plastic opening tool carefully pry the battery loose. The battery is glued to the pad; slight pressure will be needed to remove the battery.
  • The casing of the battery is soft and can easily tear. Tearing can lead to the chemicals in the battery to leak out.

Using a plastic opening tool carefully pry the battery loose. The battery is glued to the pad; slight pressure will be needed to remove the battery.

The casing of the battery is soft and can easily tear. Tearing can lead to the chemicals in the battery to leak out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Tyler Tripp                     

Member since: 08/26/2015

395 Reputation

                                      2 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       USF Tampa, Team 14-23, Meier Fall 2015                        

                                                  Member of USF Tampa, Team 14-23, Meier Fall 2015 



                    USFT-MEIER-F15S14G23                     


                                            4 Members                     


                                            14 Guides authored                     

Pico Herbie - Mar 21, 2019

Reply

But whats the secret to cleaning off the glue and resealing it?