Difficulty

Moderate

Steps

5

Time Required

                          2 - 3 minutes

Sections

2

  • Rear Case
  • 1 step
  • Battery
  • 4 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackAsus MeMO Pad 8 ME181C

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Case
  • Insert a plastic opening tool into the seam between the rear case and the screen.
  • Work the plastic opening tool around the perimeter of the device to completely remove the rear case.

Insert a plastic opening tool into the seam between the rear case and the screen.

Work the plastic opening tool around the perimeter of the device to completely remove the rear case.

1024

Step 2

              Battery
  • Use the flat end of the nylon spudger to flip up the retaining flap of the Zero Insertion Force (ZIF) connector holding the orange motherboard ribbon cable in place.

Use the flat end of the nylon spudger to flip up the retaining flap of the Zero Insertion Force (ZIF) connector holding the orange motherboard ribbon cable in place.

Step 3

  • Use the flat end of the nylon spudger to flip up the retaining flap of the ZIF connector holding the black motherboard ribbon cable in place.

Use the flat end of the nylon spudger to flip up the retaining flap of the ZIF connector holding the black motherboard ribbon cable in place.

Step 4

  • Use the pointed end of the nylon spudger to pop up the battery connector.
  • When reconnecting the battery cable after replacing the battery, press the battery connector with your finger until it clicks into place.

Use the pointed end of the nylon spudger to pop up the battery connector.

When reconnecting the battery cable after replacing the battery, press the battery connector with your finger until it clicks into place.

Step 5

  • Use the flat end of the nylon spudger to pry up the battery.
  • The battery is secured with adhesive. Some force is required to detach battery from the device.
  • If removing motherboard is necessary, it may be easier complete this step with the motherboard simultaneously later.

Use the flat end of the nylon spudger to pry up the battery.

The battery is secured with adhesive. Some force is required to detach battery from the device.

If removing motherboard is necessary, it may be easier complete this step with the motherboard simultaneously later.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 5 other contributors 


                    Amy Clarke

Member since: 05/05/2016

223 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       iFixit, Team 1-1, Wacker Spring 2016                        

                                                  Member of iFixit, Team 1-1, Wacker Spring 2016 



                    FIX-WACKER-S16S1G1                     


                                            3 Members                     


                                            4 Guides authored

Joe Martin - Oct 11, 2017

Reply

Great instructions and easy disassembly/reassembly. Photos really helped!

P Schmied - Mar 9, 2020

Reply

The time and difficulty for doing this and the me176cx should be the same.