Asus Memo Pad Fhd10 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

Battery
4 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

BackASUS MeMo Pad FHD10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Make sure that the device is turned off as a precaution.
Unplug the charger and remove any memory card you may have in the device.
Wedge the plastic opening tool between the front and back cover on every side.
Slide the plastic opening tool back and forth to make sure that the back cover is disconnected.
Once disconnected, remove the back cover from the device screen.

Make sure that the device is turned off as a precaution.

Unplug the charger and remove any memory card you may have in the device.

Wedge the plastic opening tool between the front and back cover on every side.

Slide the plastic opening tool back and forth to make sure that the back cover is disconnected.

Once disconnected, remove the back cover from the device screen.

1024

Step 2

Remove the protective copper sticker and all tape fixed on the device.
Using tweezers, remove the ribbon cable from their connections attached to the motherboard.
While using the tweezers, make sure to use minimum force and precision to avoid damaging any components.

Remove the protective copper sticker and all tape fixed on the device.

Using tweezers, remove the ribbon cable from their connections attached to the motherboard.

While using the tweezers, make sure to use minimum force and precision to avoid damaging any components.

Step 3

Remove the four 2 mm Phillips #00 screws holding the battery tray in place.

Remove the four 2 mm Phillips #00 screws holding the battery tray in place.

Step 4

Locate the battery cable attached to the motherboard. Using the same technique used on the ribbons, do the same with the battery.
Remove the battery from the device. Once removed, use the plastic tool to separate the metal frame from the battery.
When separating the metal frame, be sure to hold on in the center as the battery is two separate cells.

Locate the battery cable attached to the motherboard. Using the same technique used on the ribbons, do the same with the battery.

Remove the battery from the device. Once removed, use the plastic tool to separate the metal frame from the battery.

When separating the metal frame, be sure to hold on in the center as the battery is two separate cells.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 8 other contributors

                    Dmitry

Member since: 01/21/2015

391 Reputation

                                      3 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       USF Tampa, Team 9-5, Blackwell Winter 2015                        

                                                  Member of USF Tampa, Team 9-5, Blackwell Winter 2015 



                    USFT-BLACKWELL-W15S9G5                     


                                            4 Members                     


                                            10 Guides authored

Night Knight - Jun 10, 2016

Where i can get new battery for this tablet?

Needs More Images#

Slice and Dice#

Better Introduction#

Introduction#

What you need#

#

#

#

#

#

#

Team#

#