Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
1
- Battery
- 5 steps
Flags
0
BackAsus MeMO Pad HD 8 ME180A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use a plastic opening tool to separate the back half from the front half.
- Pull the back panel away from the device.
- The volume buttons can fall out of the case. Be careful not to lose them.
Use a plastic opening tool to separate the back half from the front half.
Pull the back panel away from the device.
The volume buttons can fall out of the case. Be careful not to lose them.
1024
Step 2
- Ensure that you are wearing your Anti-Static Wrist Strap.
Ensure that you are wearing your Anti-Static Wrist Strap.
Step 3
- Lift the white bar on the ZIF connector and pull the metal connector out.
Lift the white bar on the ZIF connector and pull the metal connector out.
Step 4
- Using your spudger, press down on the two spots shown in order to release the cables.
- Ensure that the touchscreen cables are fully disconnected.
Using your spudger, press down on the two spots shown in order to release the cables.
Ensure that the touchscreen cables are fully disconnected.
Step 5
- Using a PH#0 screwdriver, remove the twelve silver 3.2 mm screws.
- Pull the battery out.
Using a PH#0 screwdriver, remove the twelve silver 3.2 mm screws.
Pull the battery out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Rebecca Ellerhorst
Member since: 10/04/2016
537 Reputation
5 Guides authored
Badges:
12
+9 more badges
Team
USF Tampa, Team 2-5, Nance Fall 2016
Member of USF Tampa, Team 2-5, Nance Fall 2016
USFT-NANCE-F16S2G5
3 Members
10 Guides authored