Difficulty

Moderate

Steps

11

Time Required

                          30 minutes

Sections

3

  • Battery
  • 5 steps
  • Motherboard
  • 4 steps
  • Camera
  • 2 steps

Flags

0

  • BackAsus MeMO Pad HD 8 ME180A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Use a plastic opening tool to separate the back half from the front half.
  • Pull the back panel away from the device.
  • The volume buttons can fall out of the case. Be careful not to lose them.

Use a plastic opening tool to separate the back half from the front half.

Pull the back panel away from the device.

The volume buttons can fall out of the case. Be careful not to lose them.

1024

Step 2

  • Ensure that you are wearing your Anti-Static Wrist Strap.

Ensure that you are wearing your Anti-Static Wrist Strap.

Step 3

  • Lift the white bar on the ZIF connector and pull the metal connector out.

Lift the white bar on the ZIF connector and pull the metal connector out.

Step 4

  • Using your spudger, press down on the two spots shown in order to release the cables.
  • Ensure that the touchscreen cables are fully disconnected.

Using your spudger, press down on the two spots shown in order to release the cables.

Ensure that the touchscreen cables are fully disconnected.

Step 5

  • Using a PH#0 screwdriver, remove the twelve silver 3.2 mm screws.
  • Pull the battery out.

Using a PH#0 screwdriver, remove the twelve silver 3.2 mm screws.

Pull the battery out.

Step 6

              Motherboard
  • Disconnect GPS Antenna cable.

Disconnect GPS Antenna cable.

Step 7

  • Flip the latch and pull the ribbon cable to disconnect the ZIF connector.

Flip the latch and pull the ribbon cable to disconnect the ZIF connector.

Step 8

Step 9

  • Use a PH#0 screwdriver to unscrew the six 3.0 mm black screws.
  • Lift the motherboard straight up to remove.

Use a PH#0 screwdriver to unscrew the six 3.0 mm black screws.

Lift the motherboard straight up to remove.

Step 10

              Camera
  • Upon removal of the motherboard, flip the motherboard to the side so the front-face camera faces you.
  • Remove the front facing camera.

Upon removal of the motherboard, flip the motherboard to the side so the front-face camera faces you.

Remove the front facing camera.

Step 11

  • Upon removal of the front-face camera, flip your device to the side so the back-face camera faces you.
  • Using a pair of tweezers, grab the back-face camera and pull it straight out.

Upon removal of the front-face camera, flip your device to the side so the back-face camera faces you.

Using a pair of tweezers, grab the back-face camera and pull it straight out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Rebecca Ellerhorst

Member since: 10/04/2016

537 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team 2-5, Nance Fall 2016                        

                                                  Member of USF Tampa, Team 2-5, Nance Fall 2016 



                    USFT-NANCE-F16S2G5                     


                                            3 Members                     


                                            10 Guides authored