Asus Memo Pad Me172V Touch Screen Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          20 - 30 minutes

Sections

Touch Screen replacement
7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackAsus Memo Pad ME172V
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

WARNING! Work carefully and start only if you are confident you can do it!

Please SUBSCRIBE to my channel ツ

What you need

Video Overview

Step 1

              Touch Screen replacement

Switch-off the tablet.
By using a plastic tool open the back / battery cover.

Switch-off the tablet.

By using a plastic tool open the back / battery cover.

1024

Step 2

Disconnect and remove the battery.

Disconnect and remove the battery.

Step 3

Disconnect the LCD display flex cable.
Disconnect the touchscreen flex cable.
Disconnect and remove the loudspeaker.
Unscrew 10x screws.
Now you can remove the mother board

Disconnect the LCD display flex cable.

Disconnect the touchscreen flex cable.

Disconnect and remove the loudspeaker.

Unscrew 10x screws.

Now you can remove the mother board

Step 4

Remove the metal LCD display shield.

Remove the metal LCD display shield.

Step 5

              Separate the LCD panel from the digitizer

There are many clips holding the LCD panel to the metal frame.
Use a spudger to loosen the clips holding the LCD display.

There are many clips holding the LCD panel to the metal frame.

Use a spudger to loosen the clips holding the LCD display.

Step 6

Heat the touch screen.
Use a cutter only to start detachment the touchscreen. Then continue with a plastic tool.

Heat the touch screen.

Use a cutter only to start detachment the touchscreen. Then continue with a plastic tool.

Step 7

After separation the touchscreen from the front bezel, remove the LCD display frame.
This spare part have a double sided adhesive tape. Otherwise you should place.
.
Did you do it successfully?
.
Please SUBSCRIBE to my channel ツ

After separation the touchscreen from the front bezel, remove the LCD display frame.

This spare part have a double sided adhesive tape. Otherwise you should place.

Did you do it successfully?

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 2 other contributors

                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored

Alex Tucker - Jul 22, 2015

Is it possible to replace the bezel the way you would an iPad screen instead of going from the back? I feel like a head gun to the front would save you a lot of hassle? Please correct me if I’m wrong

Member-Contributed Guide#

Introduction#

What you need#

Video Overview#

Team#

Member-Contributed Guide

Introduction

What you need

Video Overview

Team