Difficulty

Easy

Steps

6

Time Required

                          7 minutes

Sections

3

  • Back Case
  • 2 steps
  • Battery
  • 2 steps
  • RAM Stick
  • 2 steps

Flags

0

  • BackASUS N550JK-DS71T

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case
  • Turn the laptop off and unplug all cables.
  • Flip over so the bottom is facing you.
  • Remove the ten 3mm Torx T5 screws from the bottom cover.

Turn the laptop off and unplug all cables.

Flip over so the bottom is facing you.

Remove the ten 3mm Torx T5 screws from the bottom cover.

1024

Step 2

  • Use a spudger to wedge between the laptop and bottom cover—lift upwards to pry open.
  • Run the spudger along the perimeter of the bottom cover to remove.

Use a spudger to wedge between the laptop and bottom cover—lift upwards to pry open.

Run the spudger along the perimeter of the bottom cover to remove.

Step 3

              Battery
  • Remove the three 4mm JIS #0 screws from the battery.

Remove the three 4mm JIS #0 screws from the battery.

Step 4

  • Using both hands, lift the battery vertically out of the device.

Using both hands, lift the battery vertically out of the device.

Step 5

              RAM Stick
  • Put on anti-static wristband and attach clip-end to any metal screw insert.
  • The wristband is recommended when working closely with circuit boards due to potential static discharge.

Put on anti-static wristband and attach clip-end to any metal screw insert.

The wristband is recommended when working closely with circuit boards due to potential static discharge.

Step 6

  • The RAM will be secured by two metal clips surrounded by white plastic.
  • Spread the metal clips and the RAM stick will pop up. Then gently remove the RAM stick.

The RAM will be secured by two metal clips surrounded by white plastic.

Spread the metal clips and the RAM stick will pop up. Then gently remove the RAM stick.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Steven Hahn

Member since: 01/29/2018

866 Reputation

                                      6 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       USF Tampa, Team S5-G1, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S5-G1, Passmore Spring 2018 



                    USFT-PASSMORE-S18S5G1                     


                                            4 Members                     


                                            6 Guides authored