Difficulty

Moderate

Steps

5

Time Required

                          15 - 30 minutes

Sections

1

  • Vibrator
  • 5 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAsus Padfone 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Power Down Device
  • Hold down the power button

Hold down the power button

1024

Step 2

              Remove Back Plate
  • Use plastic opening tool to pry off the back cover of the phone.

Use plastic opening tool to pry off the back cover of the phone.

Step 3

              Battery Removal
  • Remove the warning sticker that covers the battery plug and connecting cord.
  • Look for the widest gap on either side of the battery. Using the plastic opening tool carefully lift battery out.
  • The battery is held down with adhesive. Be careful not to damage battery or connecting cord.
  • Disconnect battery connecting cord using tweezers.

Remove the warning sticker that covers the battery plug and connecting cord.

Look for the widest gap on either side of the battery. Using the plastic opening tool carefully lift battery out.

The battery is held down with adhesive. Be careful not to damage battery or connecting cord.

Disconnect battery connecting cord using tweezers.

Step 4

              Remove Internal Back Plate
  • Use T5 Torx screwdriver to remove 14 screws from internal back plate.
  • Use of magnetic pad will help with keeping track of screws.
  • Once screws are out, remove the plate.

Use T5 Torx screwdriver to remove 14 screws from internal back plate.

Use of magnetic pad will help with keeping track of screws.

Once screws are out, remove the plate.

Step 5

              Removal of A68 Vibrator
  • Use tweezers to remove motor from housing, pulling the plug downward away from the phone.
  • Use tweezers to unplug the device from the circuit board.

Use tweezers to remove motor from housing, pulling the plug downward away from the phone.

Use tweezers to unplug the device from the circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Zach Standridge

Member since: 09/25/2014

350 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team 5-4, Mcgee Fall 2014                        

                                                  Member of USF Tampa, Team 5-4, Mcgee Fall 2014 



                    USFT-MCGEE-F14S5G4                     


                                            4 Members                     


                                            7 Guides authored