Difficulty
Moderate
Steps
3
Time Required
15 - 30 minutes
Sections
1
- Rear Facing Camera
- 3 steps
Flags
0
BackAsus PadFone S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Remove Back Cover
- Place your thumb in the charging port and pry the back cover off of the phone.
- Separate cover all the way around the sides of the phone.
Place your thumb in the charging port and pry the back cover off of the phone.
Separate cover all the way around the sides of the phone.
1024
Step 2
Remove Back Panel
- Remove all the screws on the back panel using a T5 Torx screwdriver.
- Lift the back panel off to reveal the logic board and battery.
Remove all the screws on the back panel using a T5 Torx screwdriver.
Lift the back panel off to reveal the logic board and battery.
Step 3
Remove Back Camera
- The back camera is located at the top left on the logic board.
- Use tweezers to lift back camera strip from logic board.
- Lift back camera out of logic board.
- It is not necessary to remove logic board for removal of the back camera.
The back camera is located at the top left on the logic board.
Use tweezers to lift back camera strip from logic board.
Lift back camera out of logic board.
It is not necessary to remove logic board for removal of the back camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Christian Trippe
Member since: 10/21/2014
79 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team 6-1, Vijaybhaskar Fall 2014
Member of UMass Dartmouth, Team 6-1, Vijaybhaskar Fall 2014
UMASSD-VIJAYBHASKAR-F14S6G1
3 Members
10 Guides authored