Difficulty

Easy

Steps

5

Time Required

                          15 minutes            

Sections

1

  • Battery
  • 5 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackASUS PadFone X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the back panel.               
  • Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upwards.
  • Work your way around the phone until the entire back cover is loose.

Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upwards.

Work your way around the phone until the entire back cover is loose.

1024

Step 2

              Remove the screws.               
  • Remove the 13 - 3.6 mm screws using the Torx T5 bit in the screwdriver.

Remove the 13 - 3.6 mm screws using the Torx T5 bit in the screwdriver.

Step 3

              Remove the Mid-Frame               
  • Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards.
  • Work your way around the phone until the entire back cover is loose and remove the mid-frame.

Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards.

Work your way around the phone until the entire back cover is loose and remove the mid-frame.

Step 4

              Remove the Battery Connector               
  • Using the blue plastic opening tool, gently disconnect the battery cable from the motherboard.
  • Applying too much force may damage the connector.

Using the blue plastic opening tool, gently disconnect the battery cable from the motherboard.

Applying too much force may damage the connector.

Step 5

              Remove the battery.               
  • Use the blue plastic opening tool to pry the battery pack from the phone. Pry along edge away from the motherboard as this might damage the motherboard.
  • The battery pack is held on by double sided tape, you will have to apply some force when prying out the battery.

Use the blue plastic opening tool to pry the battery pack from the phone. Pry along edge away from the motherboard as this might damage the motherboard.

The battery pack is held on by double sided tape, you will have to apply some force when prying out the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    John Kue                     

Member since: 10/07/2014

379 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team 8-4, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 8-4, Leahy Fall 2014 



                    USFT-LEAHY-F14S8G4                     


                                            4 Members                     


                                            5 Guides authored