Asus Padfone X Front Facing Camera Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          15 - 30 minutes

Sections

Motherboard
13 steps

Flags

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

BackASUS PadFone X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Motherboard

Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upwards.
Work your way around the phone until the entire back cover is loose.

Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upwards.

Work your way around the phone until the entire back cover is loose.

1024

Step 2

Remove the thirteen 3.6 mm screws using the Torx T5 bit in the screwdriver.

Remove the thirteen 3.6 mm screws using the Torx T5 bit in the screwdriver.

Step 3

Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards.
Work your way around the phone until the entire back cover is loose and remove the mid-frame.

Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards.

Work your way around the phone until the entire back cover is loose and remove the mid-frame.

Step 4

Using the plastic blue plastic opening tool, gently disconnect the battery cable from the motherboard.
Applying too much force will damage the connector.

Using the plastic blue plastic opening tool, gently disconnect the battery cable from the motherboard.

Applying too much force will damage the connector.

Step 5

Use the blue plastic opening tool to pry the battery pack from the phone. Pry along edge away from the motherboard as this might damage the motherboard.
The battery pack is held on by double sided tape, you will have to apply some force when prying out the battery.

Use the blue plastic opening tool to pry the battery pack from the phone. Pry along edge away from the motherboard as this might damage the motherboard.

The battery pack is held on by double sided tape, you will have to apply some force when prying out the battery.

Step 6

Using a spudger, pry the vibration motor connector from the motherboard.

Using a spudger, pry the vibration motor connector from the motherboard.

Step 7

Use the blue plastic opening tool to gently pry the camera connector up from its socket on the motherboard.
Applying too much force will damage the conector

Use the blue plastic opening tool to gently pry the camera connector up from its socket on the motherboard.

Applying too much force will damage the conector

Step 8

Using the tweezers, remove the rear camera from the Padfone X.
The camera is lightly glued to the motherboard. You may need to use a plastic opening tool to loosen the adhesive under the camera.

Using the tweezers, remove the rear camera from the Padfone X.

The camera is lightly glued to the motherboard. You may need to use a plastic opening tool to loosen the adhesive under the camera.

Step 9

Insert the tip of the flat head screwdriver between the panel and the metal clip then gently push down until the clip is slightly bent away from the panel.
Do this for all the clips holding the panel down.
After all clips are bent away, remove the panel.

Insert the tip of the flat head screwdriver between the panel and the metal clip then gently push down until the clip is slightly bent away from the panel.

Do this for all the clips holding the panel down.

After all clips are bent away, remove the panel.

Step 10

Disconnect the first connector by prying it upward using the blue plastic opening tool.
Disconnect the second connector by first lifting the lock then pulling the connector outward.

Disconnect the first connector by prying it upward using the blue plastic opening tool.

Disconnect the second connector by first lifting the lock then pulling the connector outward.

Step 11

Insert the tip of the blue plastic opening tool under the motherboard and gently pry upward.
Work your way around until the motherboard is free.

Insert the tip of the blue plastic opening tool under the motherboard and gently pry upward.

Work your way around until the motherboard is free.

Step 12

Flip the motherboard over and locate the front facing camera.
Using the tweezers gently remove the black locking mechanism.
The black locking mechanism is very fragile and extreme care should be exercised during removal.

Flip the motherboard over and locate the front facing camera.

Using the tweezers gently remove the black locking mechanism.

The black locking mechanism is very fragile and extreme care should be exercised during removal.

Step 13

Use the tweezers to gently pull on the connector to remove the camera.

Use the tweezers to gently pull on the connector to remove the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Keith Cooper

Member since: 01/24/2017

122 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI, Team 2-1, Baechle Spring 2017                        

                                                  Member of IUPUI, Team 2-1, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S2G1                     


                                            4 Members                     


                                            4 Guides authored

Slice and Dice#

Step Trimmer#

Introduction#

What you need#

Team#

Slice and Dice

Step Trimmer

Introduction

What you need

Team