Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

1

  • Docking Port
  • 6 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackAsus PadFone X mini

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Docking Port
  • With the phone facing down, look at the bottom right side corner and there should be a groove. Use a plastic opening tool and lift up to remove outside cover.

With the phone facing down, look at the bottom right side corner and there should be a groove. Use a plastic opening tool and lift up to remove outside cover.

1024

Step 2

  • Take the battery out of the phone.

Take the battery out of the phone.

Step 3

  • Remove the 10 screws around the perimeter of the phone.
  • Remove the cover.

Remove the 10 screws around the perimeter of the phone.

Remove the cover.

Step 4

  • Use tweezers to remove the black strip on the left side of the motherboard.
  • The motherboard is the green board on the side with the screen.
  • Be careful not to rip this black strip out of the phone since you will need to reconnect it later. You only need to disconnect it from the mother board.

Use tweezers to remove the black strip on the left side of the motherboard.

The motherboard is the green board on the side with the screen.

Be careful not to rip this black strip out of the phone since you will need to reconnect it later. You only need to disconnect it from the mother board.

Step 5

  • Remove the gold flap on the left side of the motherboard.

Remove the gold flap on the left side of the motherboard.

Step 6

  • Remove the motherboard and replace it.
  • The docking port is connected to your motherboard so you have to get the whole thing replaced if it isn’t working.

Remove the motherboard and replace it.

The docking port is connected to your motherboard so you have to get the whole thing replaced if it isn’t working.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Nicolette Carr

Member since: 09/18/2018

380 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of North Texas, Team S4-G2, Raign Fall 2018                        

                                                  Member of University of North Texas, Team S4-G2, Raign Fall 2018 



                    UNT-RAIGN-F18S4G2                     


                                            4 Members                     


                                            8 Guides authored