Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
1
- Speaker
- 5 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackAsus PadFone X mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Speaker
- With the phone facing down, look at the bottom right side corner and there should be a groove. Use a plastic opening tool and lift up to remove outside cover.
- This is not the cover with the speaker attached.
With the phone facing down, look at the bottom right side corner and there should be a groove. Use a plastic opening tool and lift up to remove outside cover.
This is not the cover with the speaker attached.
1024
Step 2
- Lift the battery out from the top of the device.
Lift the battery out from the top of the device.
Step 3
- Around the perimeter, there should be 10 2 mm T5 Torx screws. Take them out.
- Remove the cover.
Around the perimeter, there should be 10 2 mm T5 Torx screws. Take them out.
Remove the cover.
Step 4
- Turn the cover over.
- The speaker is attached to the inside of the cover and to the right of the camera hole.
Turn the cover over.
The speaker is attached to the inside of the cover and to the right of the camera hole.
Step 5
- Remove speaker with standard tweezers to minimize damage, and replace.
Remove speaker with standard tweezers to minimize damage, and replace.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Nicolette Carr
Member since: 09/18/2018
380 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
University of North Texas, Team S4-G2, Raign Fall 2018
Member of University of North Texas, Team S4-G2, Raign Fall 2018
UNT-RAIGN-F18S4G2
4 Members
8 Guides authored
