Difficulty

Moderate

Steps

6

Time Required

                          10 - 30 minutes

Sections

1

  • Front Camera Lens
  • 6 steps

Flags

0

  • BackASUS Padfone X Mini Station

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Camera Lens
  • Insert the plastic opening tool between the edge of the screen and the back cover.
  • Gently pry them apart. Use hands to pull them apart if necessary.

Insert the plastic opening tool between the edge of the screen and the back cover.

Gently pry them apart. Use hands to pull them apart if necessary.

1024

Step 2

  • Use a Phillips #00 screwdriver to remove the three 2.5mm screws that secure the speaker case to the motherboard.
  • Remove all tape covering the screws before removing them.

Use a Phillips #00 screwdriver to remove the three 2.5mm screws that secure the speaker case to the motherboard.

Remove all tape covering the screws before removing them.

Step 3

  • Use tweezers to remove cover sticker on the dock station.

Use tweezers to remove cover sticker on the dock station.

Step 4

  • Use a Phillips #000 screwdriver to remove the six 0.6mm screws that secure the dock station case to the motherboard.

Use a Phillips #000 screwdriver to remove the six 0.6mm screws that secure the dock station case to the motherboard.

Step 5

  • Flip the device upwards.
  • Gently push the right side of motherboard down away from the dock station.
  • Do not push the motherboard so hard as it is still attached to a connector. Excessive force applied might cause external damage to it.

Flip the device upwards.

Gently push the right side of motherboard down away from the dock station.

Do not push the motherboard so hard as it is still attached to a connector. Excessive force applied might cause external damage to it.

Step 6

  • Use tweezers to detach the camera from the motherboard.

Use tweezers to detach the camera from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Nuri Syahirah Mohd Safian

Member since: 10/26/2018

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team S2-G7, Peak Fall 2018                        

                                                  Member of UMass Dartmouth, Team S2-G7, Peak Fall 2018 



                    UMASSD-PEAK-F18S2G7                     


                                            3 Members                     


                                            4 Guides authored

Jannell A McDonald - Apr 5, 2019

Reply

I can not get my back off the device at the top of it it doesn’t want to complete separate.