Asus Padfone X Mini Station Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Battery
3 steps
Speaker
3 steps

Flags

BackASUS Padfone X Mini Station
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Insert the plastic opening tool between the edge of the screen and the back cover.
Gently pry them apart. Use hands to pull them apart if necessary.

Insert the plastic opening tool between the edge of the screen and the back cover.

Gently pry them apart. Use hands to pull them apart if necessary.

1024

Step 2

Remove the three pieces of tape that secure the battery and its wires. Peel gently so you don’t damage any wires.

Remove the three pieces of tape that secure the battery and its wires. Peel gently so you don’t damage any wires.

Step 3

Disconnect the ribbon from the motherboard by gently pulling with your fingers.
Using the opening tools, pry the battery off of the adhesive.
Be careful not to pull the battery out right away. The ribbon cable is tucked beneath another wire.

Disconnect the ribbon from the motherboard by gently pulling with your fingers.

Using the opening tools, pry the battery off of the adhesive.

Be careful not to pull the battery out right away. The ribbon cable is tucked beneath another wire.

Step 4

              Speaker

Use a Phillips #00 screwdriver to remove the three 2.5mm screws that secure the speaker case to the motherboard.
Remove all tape covering the screws before removing them.

Use a Phillips #00 screwdriver to remove the three 2.5mm screws that secure the speaker case to the motherboard.

Remove all tape covering the screws before removing them.

Step 5

Use tweezers to remove the three pieces of tape that are covering the metal.
Insert the metal spudger beneath the speaker case and wedge it upwards to remove speaker case from the device body.

Use tweezers to remove the three pieces of tape that are covering the metal.

Insert the metal spudger beneath the speaker case and wedge it upwards to remove speaker case from the device body.

Step 6

Use tweezers to detach the connecter from the motherboard.

Use tweezers to detach the connecter from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Alexzander Pastore

Member since: 10/26/2018

389 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team S2-G7, Peak Fall 2018                        

                                                  Member of UMass Dartmouth, Team S2-G7, Peak Fall 2018 



                    UMASSD-PEAK-F18S2G7                     


                                            3 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team