Difficulty

Easy

Steps

6

Time Required

                          15 - 30 minutes

Sections

1

  • Rear Facing Camera
  • 6 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackASUS PadFone X

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove the back panel
  • Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upward.
  • Work your way around the phone until the entire back cover is loose.

Using the blue plastic opening tool, insert the tip into the crease between the back cover and the phone and pry it upward.

Work your way around the phone until the entire back cover is loose.

1024

Step 2

              Remove the screws.
  • Remove the thirteen 3.6 mm screws using the torx T5 bit in the screwdriver.

Remove the thirteen 3.6 mm screws using the torx T5 bit in the screwdriver.

Step 3

              Remove the Mid-Frame.
  • Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards.
  • Work your way around the phone until the entire back cover is loose and remove the mid-frame.

Using the blue plastic opening tool, insert the tip into the crease between the mid-frame and the phone and pry it upwards.

Work your way around the phone until the entire back cover is loose and remove the mid-frame.

Step 4

              Remove the camera connector.
  • Use the blue plastic opening tool to gently pry the camera connector up from its socket on the motherboard.
  • Applying too much force may damage the connector.

Use the blue plastic opening tool to gently pry the camera connector up from its socket on the motherboard.

Applying too much force may damage the connector.

Step 5

              Remove the camera.
  • Using the tweezers, remove the rear camera from the Padfone X.
  • The camera is lightly glued to the motherboard. You may need to use a plastic opening tool to loosen the adhesive under the camera.

Using the tweezers, remove the rear camera from the Padfone X.

The camera is lightly glued to the motherboard. You may need to use a plastic opening tool to loosen the adhesive under the camera.

Step 6

              Replacing the camera.
  • Once the camera has been pulled out, replace the old camera with a new camera.

Once the camera has been pulled out, replace the old camera with a new camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    nestor

Member since: 10/07/2014

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       USF Tampa, Team 8-4, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 8-4, Leahy Fall 2014 



                    USFT-LEAHY-F14S8G4                     


                                            4 Members                     


                                            5 Guides authored