Asus Padfone X Station Power And Volume Contacts Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Back Cover
1 step
Power and Volume Contacts
4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackASUS PadFone X Station
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Back Cover

Using the plastic opening tools, insert it into the edge and pry open.
Use hands to help pull the back off from the front if needed.

Using the plastic opening tools, insert it into the edge and pry open.

Use hands to help pull the back off from the front if needed.

1024

Step 2

              Locate CON1501

Locate CON1501
CON1501 will be visible underneath the contacts. You can readily see this if you look for the orange strip of film in the top right corner of the back of the Asus Padfone X Docking Station.

Locate CON1501

CON1501 will be visible underneath the contacts. You can readily see this if you look for the orange strip of film in the top right corner of the back of the Asus Padfone X Docking Station.

Step 3

              Remove (1) phillips screw.

Remove (1) phillips screw
Using a +PH00 Phillips screwdriver , you will unscrew the Phillips screw in the top right corner of the back of the ASUS Padfone X docking station.
To unscrew the Phillips screw simply position the screwdriver inside of the screw, then rotate it counter-clockwise until the screw is fully removed from the docking station.

Remove (1) phillips screw

Using a +PH00 Phillips screwdriver , you will unscrew the Phillips screw in the top right corner of the back of the ASUS Padfone X docking station.

To unscrew the Phillips screw simply position the screwdriver inside of the screw, then rotate it counter-clockwise until the screw is fully removed from the docking station.

Step 4

              Disconnect ribbon from CON1510

Disconnect ribbon from CON1510
To disconnect the ribbon from CON1510, use a pair of tweezers and gently lift the connect up and back from the device.

Disconnect ribbon from CON1510

To disconnect the ribbon from CON1510, use a pair of tweezers and gently lift the connect up and back from the device.

Step 5

              Lift contacts off device

Now that the contacts are no longer attached, you can use either tweezers or your fingers to grasp and lift contacts vertically off of the device.

Now that the contacts are no longer attached, you can use either tweezers or your fingers to grasp and lift contacts vertically off of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors

                    Jessica

Member since: 10/07/2014

150 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team 7-4, Leahy Fall 2014                        

                                                  Member of USF Tampa, Team 7-4, Leahy Fall 2014 



                    USFT-LEAHY-F14S7G4                     


                                            4 Members                     


                                            8 Guides authored

Better Introduction#

What you need#

Team#

Better Introduction

What you need

Team