Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Back Cover
- 3 steps
Flags
0
BackAsus Q200E-CT144H
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- To start, turn off the laptop and disconnect the power cable.
- If the computer is on or plugged in, it could cause electric shock.
- Flip the laptop over so the back panel is visible.
To start, turn off the laptop and disconnect the power cable.
If the computer is on or plugged in, it could cause electric shock.
Flip the laptop over so the back panel is visible.
1024
Step 2
- Remove the 9 screws holding the cover in place by taking a Phillips #00 Screwdriver and turning it counterclockwise.
Remove the 9 screws holding the cover in place by taking a Phillips #00 Screwdriver and turning it counterclockwise.
Step 3
- Use an iFixit opening tool to lift the back cover and remove it from the laptop.
Use an iFixit opening tool to lift the back cover and remove it from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Kirsti Wattles
Member since: 09/16/2019
689 Reputation
6 Guides authored
Badges:
5
+2 more badges
Team
Embry-Riddle Aeronautical University, Team S8-G2, Salas Fall 2019
Member of Embry-Riddle Aeronautical University, Team S8-G2, Salas Fall 2019
ERAU-SALAS-F19S8G2
3 Members
6 Guides authored
