Difficulty
Moderate
Steps
4
Time Required
15 minutes
Sections
1
- Screen
- 4 steps
Flags
0
BackAsus Q200E-CT144H
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Turn off the laptop and disconnect the power cable.
- If the laptop is powered on, it could cause an electric shock.
- Open the laptop and place it on a hard, flat surface with the screen facing up.
Turn off the laptop and disconnect the power cable.
If the laptop is powered on, it could cause an electric shock.
Open the laptop and place it on a hard, flat surface with the screen facing up.
1024
Step 2
- Take a metal spudger and insert it under the screen.
- Slowly move the spudger across the length of the screen, separating the sections.
Take a metal spudger and insert it under the screen.
Slowly move the spudger across the length of the screen, separating the sections.
Step 3
- Remove the four 3.3mm Phillips #00 screws.
Remove the four 3.3mm Phillips #00 screws.
Step 4
- Pull apart the screen from the casing of the laptop.
- Disconnect the power connector using tweezers.
Pull apart the screen from the casing of the laptop.
Disconnect the power connector using tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Kirsti Wattles
Member since: 09/16/2019
689 Reputation
6 Guides authored
Badges:
5
+2 more badges
Team
Embry-Riddle Aeronautical University, Team S8-G2, Salas Fall 2019
Member of Embry-Riddle Aeronautical University, Team S8-G2, Salas Fall 2019
ERAU-SALAS-F19S8G2
3 Members
6 Guides authored