Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

2

  • Back Case
  • 3 steps
  • Battery
  • 3 steps

Flags

0

  • BackAsus Q302L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case
  • Make sure the laptop is disconnected from a power supply and is TURNED OFF.
  • Use a Phillips #0 screw driver to remove all ten 10 mm screws around the back of the laptop.

Make sure the laptop is disconnected from a power supply and is TURNED OFF.

Use a Phillips #0 screw driver to remove all ten 10 mm screws around the back of the laptop.

1024

Step 2

  • Wedge a plastic opening tool under the rear case near the hinge.
  • Pry around the outer edge to release the plastic clips holding the rear case to the laptop.

Wedge a plastic opening tool under the rear case near the hinge.

Pry around the outer edge to release the plastic clips holding the rear case to the laptop.

Step 3

  • Once the cover is free from all the clips, remove the cover from the laptop.

Once the cover is free from all the clips, remove the cover from the laptop.

Step 4

              Battery
  • Use a Phillips #0 screwdriver and remove all five 5 mm screws securing the battery.

Use a Phillips #0 screwdriver and remove all five 5 mm screws securing the battery.

Step 5

  • Gently wedge a plastic opening tool under the connector.
  • Pry only on the connector not the socket itself or you risk damage to the motherboard.
  • Carefully lift the connector up away from the socket to disconnect it.

Gently wedge a plastic opening tool under the connector.

Pry only on the connector not the socket itself or you risk damage to the motherboard.

Carefully lift the connector up away from the socket to disconnect it.

Step 6

  • Once the screws and connector are removed, simply pull out the battery from its place.

Once the screws and connector are removed, simply pull out the battery from its place.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 9 other contributors 


                    khalifa

Member since: 03/02/2017

107 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team S13-G4, Cagle Spring 2017                        

                                                  Member of USF Tampa, Team S13-G4, Cagle Spring 2017 



                    USFT-CAGLE-S17S13G4                     


                                            3 Members                     


                                            9 Guides authored