Difficulty

Moderate

Steps

10

Time Required

                          20 minutes

Sections

3

  • Back Case
  • 3 steps
  • Battery
  • 3 steps
  • Display
  • 4 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackAsus Q302L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case
  • Make sure the laptop is disconnected from a power supply and is TURNED OFF.
  • Use a Phillips #0 screw driver to remove all ten 10 mm screws around the back of the laptop.

Make sure the laptop is disconnected from a power supply and is TURNED OFF.

Use a Phillips #0 screw driver to remove all ten 10 mm screws around the back of the laptop.

1024

Step 2

  • Wedge a plastic opening tool under the rear case near the hinge.
  • Pry around the outer edge to release the plastic clips holding the rear case to the laptop.

Wedge a plastic opening tool under the rear case near the hinge.

Pry around the outer edge to release the plastic clips holding the rear case to the laptop.

Step 3

  • Once the cover is free from all the clips, remove the cover from the laptop.

Once the cover is free from all the clips, remove the cover from the laptop.

Step 4

              Battery
  • Use a Phillips #0 screwdriver and remove all five 5 mm screws securing the battery.

Use a Phillips #0 screwdriver and remove all five 5 mm screws securing the battery.

Step 5

  • Gently wedge a plastic opening tool under the connector.
  • Pry only on the connector not the socket itself or you risk damage to the motherboard.
  • Carefully lift the connector up away from the socket to disconnect it.

Gently wedge a plastic opening tool under the connector.

Pry only on the connector not the socket itself or you risk damage to the motherboard.

Carefully lift the connector up away from the socket to disconnect it.

Step 6

  • Once the screws and connector are removed, simply pull out the battery from its place.

Once the screws and connector are removed, simply pull out the battery from its place.

Step 7

              Display
  • Use a Phillips #00 screw driver to remove the five 10mm screws at the hinges.

Use a Phillips #00 screw driver to remove the five 10mm screws at the hinges.

Step 8

  • Peel back the tape and remove the two connectors.

Peel back the tape and remove the two connectors.

Step 9

  • Pull up on the black tab to remove the connector that connects to the motherboard.
  • Unplug the hard drive cable from the hard drive.
  • Carefully remove the cables from the track that they run through.

Pull up on the black tab to remove the connector that connects to the motherboard.

Unplug the hard drive cable from the hard drive.

Carefully remove the cables from the track that they run through.

Step 10

  • Carefully remove the display from the rest of the laptop.

Carefully remove the display from the rest of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Nicholas Lozier

Member since: 04/01/2019

290 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       IUPUI, Team S2-G4, Harley Spring 2019                        

                                                  Member of IUPUI, Team S2-G4, Harley Spring 2019 



                    IUPUI-HARLEY-S19S2G4                     


                                            3 Members                     


                                            2 Guides authored