Asus Q302L Fan Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          20 minutes            

Sections

2

• Back Case
• 3 steps
• Fan
• 3 steps

Flags

0

• BackAsus Q302L

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Case               

• Make sure the laptop is disconnected from a power supply and is TURNED OFF.
• Use a Phillips #0 screw driver to remove all ten 10 mm screws around the back of the laptop.

Make sure the laptop is disconnected from a power supply and is TURNED OFF.

Use a Phillips #0 screw driver to remove all ten 10 mm screws around the back of the laptop.

1024

Step 2

• Wedge a plastic opening tool under the rear case near the hinge.
• Pry around the outer edge to release the plastic clips holding the rear case to the laptop.

Wedge a plastic opening tool under the rear case near the hinge.

Pry around the outer edge to release the plastic clips holding the rear case to the laptop.

Step 3

• Once the cover is free from all the clips, remove the cover from the laptop.

Once the cover is free from all the clips, remove the cover from the laptop.

Step 4

              Fan               

• Use a Phillips #00 screwdriver to remove all three 4mm screws around the fan.
• Using the same screw driver, remove the four 4mm screws from the part of the fan that is above the processor.

Use a Phillips #00 screwdriver to remove all three 4mm screws around the fan.

Using the same screw driver, remove the four 4mm screws from the part of the fan that is above the processor.

Step 5

• Gently wedge two plastic prying tools on both sides of the black part of the connector.
• Carefully pull out the connector from its socket.

Gently wedge two plastic prying tools on both sides of the black part of the connector.

Carefully pull out the connector from its socket.

Step 6

• Once all screws and the connector are removed, you can safely pull the fan out of its place.

Once all screws and the connector are removed, you can safely pull the fan out of its place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Kerolus Gerges                     

Member since: 03/02/2017

219 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team S13-G4, Cagle Spring 2017                        

                                                  Member of USF Tampa, Team S13-G4, Cagle Spring 2017 



                    USFT-CAGLE-S17S13G4                     


                                            3 Members                     


                                            9 Guides authored