Difficulty

Easy

Steps

8

Time Required

                          10 - 15 minutes

Sections

3

  • Back Case
  • 3 steps
  • Battery
  • 3 steps
  • Hard Drive
  • 2 steps

Flags

0

  • BackAsus Q302L

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case
  • Make sure the laptop is disconnected from a power supply and is TURNED OFF.
  • Use a Phillips #0 screw driver to remove all ten 10 mm screws around the back of the laptop.

Make sure the laptop is disconnected from a power supply and is TURNED OFF.

Use a Phillips #0 screw driver to remove all ten 10 mm screws around the back of the laptop.

1024

Step 2

  • Wedge a plastic opening tool under the rear case near the hinge.
  • Pry around the outer edge to release the plastic clips holding the rear case to the laptop.

Wedge a plastic opening tool under the rear case near the hinge.

Pry around the outer edge to release the plastic clips holding the rear case to the laptop.

Step 3

  • Once the cover is free from all the clips, remove the cover from the laptop.

Once the cover is free from all the clips, remove the cover from the laptop.

Step 4

              Battery
  • Use a Phillips #0 screwdriver and remove all five 5 mm screws securing the battery.

Use a Phillips #0 screwdriver and remove all five 5 mm screws securing the battery.

Step 5

  • Gently wedge a plastic opening tool under the connector.
  • Pry only on the connector not the socket itself or you risk damage to the motherboard.
  • Carefully lift the connector up away from the socket to disconnect it.

Gently wedge a plastic opening tool under the connector.

Pry only on the connector not the socket itself or you risk damage to the motherboard.

Carefully lift the connector up away from the socket to disconnect it.

Step 6

  • Once the screws and connector are removed, simply pull out the battery from its place.

Once the screws and connector are removed, simply pull out the battery from its place.

Step 7

              Hard Drive
  • Unplug the hard drive from the connector.
  • Use a Philips #0 screwdriver to remove all four 5mm screws holding the hard drive metal mounting bracket.

Unplug the hard drive from the connector.

Use a Philips #0 screwdriver to remove all four 5mm screws holding the hard drive metal mounting bracket.

Step 8

  • Use a Phillips #0 screwdriver and remove the four 5mm screws on both sides connecting the Hard Drive to the mounting bracket.
  • Remove the Hard Drive from mounting bracket.

Use a Phillips #0 screwdriver and remove the four 5mm screws on both sides connecting the Hard Drive to the mounting bracket.

Remove the Hard Drive from mounting bracket.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Caleb Christmas

Member since: 09/27/2019

195 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       The Citadel Military College of South Carolina, Team S2-G5, Eggleston Fall 2019                        

                                                  Member of The Citadel Military College of South Carolina, Team S2-G5, Eggleston Fall 2019 



                    CMCSC-EGGLESTON-F19S2G5                     


                                            3 Members                     


                                            3 Guides authored