Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Fan and Heat Sink
- 3 steps
Flags
0
BackAsus Q302UA-BHI5T20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Fan and Heat Sink
- Unscrew the ten 10mm Phillips #0 screws.
- Use the plastic opening tool along the side of the laptop to pry open.
Unscrew the ten 10mm Phillips #0 screws.
Use the plastic opening tool along the side of the laptop to pry open.
1024
Step 2
- Remove the seven 4mm Phillips #0 screws.
- Gently pull the connector.
Remove the seven 4mm Phillips #0 screws.
Gently pull the connector.
Step 3
- Lift the heat sink and fan assembly, and you are done!
- There maybe a little resistance to being pulled up since the heat sink is attached to the CPU with thermal paste
Lift the heat sink and fan assembly, and you are done!
There maybe a little resistance to being pulled up since the heat sink is attached to the CPU with thermal paste
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Arthur Sperotto
Member since: 11/08/2018
118 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
IUPUI, Team S1-G2, Hovde Fall 2018
Member of IUPUI, Team S1-G2, Hovde Fall 2018
IUPUI-HOVDE-F18S1G2
3 Members
3 Guides authored
