Asus Q302Ua Bhi5T20 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

• Motherboard
• 10 steps

Flags

2

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackAsus Q302UA-BHI5T20

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Motherboard               

• Place laptop upside down.
• Use a Phillips #0 screwdriver to remove the ten 1 cm case screws from the bottom of the laptop.

Place laptop upside down.

Use a Phillips #0 screwdriver to remove the ten 1 cm case screws from the bottom of the laptop.

1024

Step 2

• Disconnect the CPU fan by carefully pulling out the small black connector(plug) located in the corner (redbox)
• Use a Phillips #0 screwdriver to remove the three 4 mm screws that secure the fan.

Disconnect the CPU fan by carefully pulling out the small black connector(plug) located in the corner (redbox)

Use a Phillips #0 screwdriver to remove the three 4 mm screws that secure the fan.

Step 3

• Use a Phillips #0 screwdriver to remove the four 3 mm screws that secure the heat sink.

Use a Phillips #0 screwdriver to remove the four 3 mm screws that secure the heat sink.

Step 4

• Use a Phillips #0 screwdriver to unscrew the five 5 mm screws that secure the battery.
• Disconnect the battery’s bundled cable connector and lift the battery up and out of the laptop.

Use a Phillips #0 screwdriver to unscrew the five 5 mm screws that secure the battery.

Disconnect the battery’s bundled cable connector and lift the battery up and out of the laptop.

Step 5

• Disconnect the WiFi antennae by gently pulling up at each antenna’s connector. Use a spudger to help lift each antenna free from the WiFi card if needed.

Disconnect the WiFi antennae by gently pulling up at each antenna’s connector. Use a spudger to help lift each antenna free from the WiFi card if needed.

Step 6

• Speaker Data Connector.
• Gently pry out.

Speaker Data Connector.

Gently pry out.

Step 7

• Pull up the ZIF connector tabs and then pull out the ribbon cables.
• For the orange boxes, you pull the little black tab up to remove connector.
• A little extra force might need to be used for this step.

Pull up the ZIF connector tabs and then pull out the ribbon cables.

For the orange boxes, you pull the little black tab up to remove connector.

A little extra force might need to be used for this step.

Step 8

• Display Connector.
• Pull tab, and pull up.

Display Connector.

Pull tab, and pull up.

Step 9

• Unscrew the two 6 mm screws.
• After removing the screws, lift the hinge up slightly to give clearance to the motherboard.
• Some force is required to lift the metal hinge support up. To lift, pull up and rotate as you’re pulling up.

Unscrew the two 6 mm screws.

After removing the screws, lift the hinge up slightly to give clearance to the motherboard.

Some force is required to lift the metal hinge support up. To lift, pull up and rotate as you’re pulling up.

Step 10

• Remove the six 4 mm screws.
• Gently pick up the motherboard without applying any unnecessary force.

Remove the six 4 mm screws.

Gently pick up the motherboard without applying any unnecessary force.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Dymon Alfred                     

Member since: 09/20/2017

300 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       University of North Texas, Team S5-G4, Thomas Fall 2017                        

                                                  Member of University of North Texas, Team S5-G4, Thomas Fall 2017 



                    UNT-THOMAS-F17S5G4                     


                                            4 Members                     


                                            2 Guides authored