Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
1
- Wireless Card
- 5 steps
Flags
0
BackAsus Q302UA-BHI5T20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wireless Card
- Remove the ten 10mm Phillips #0 screws on the back of the laptop.
Remove the ten 10mm Phillips #0 screws on the back of the laptop.
1024
Step 2
- Use the iFixit opening tool along the edge of the laptop to pry open the back.
Use the iFixit opening tool along the edge of the laptop to pry open the back.
Step 3
- Remember the position of the wires. You will then pull off the two wires connected to the wireless card.
Remember the position of the wires. You will then pull off the two wires connected to the wireless card.
Step 4
- Remove the screw holding down the wireless card.
- After the screw disconnects the card “jumps up” a little.
Remove the screw holding down the wireless card.
After the screw disconnects the card “jumps up” a little.
Step 5
- Pull the wireless card out of its socket.
Pull the wireless card out of its socket.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Houston Koontz
Member since: 11/06/2018
319 Reputation
2 Guides authored
Badges:
6
+3 more badges
Team
IUPUI, Team S1-G2, Hovde Fall 2018
Member of IUPUI, Team S1-G2, Hovde Fall 2018
IUPUI-HOVDE-F18S1G2
3 Members
3 Guides authored
