Difficulty

Moderate

Steps

8

Time Required

                          15 minutes

Sections

2

  • Battery
  • 5 steps
  • CPU Fan
  • 3 steps

Flags

0

  • BackASUS Q324UA-BHI7T17

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove all 10 Phillips screws on the backplate.
  • All 10 screws are 0.55 inches and 20 mm in diameter.

Remove all 10 Phillips screws on the backplate.

All 10 screws are 0.55 inches and 20 mm in diameter.

1024

Step 2

  • Carefully remove the backplate using the plastic opening tool.

Carefully remove the backplate using the plastic opening tool.

Step 3

  • Locate the battery near the bottom.

Locate the battery near the bottom.

Step 4

  • Next, lift up the battery connector from the laptop in the upper left side of the battery, using tweezers or spudger.
  • Make sure to complete this step with caution, because if the battery is not unplugged, the motherboard may shock you.

Next, lift up the battery connector from the laptop in the upper left side of the battery, using tweezers or spudger.

Make sure to complete this step with caution, because if the battery is not unplugged, the motherboard may shock you.

Step 5

  • Remove the six screws holding in the battery with a Phillips #0 screwdriver.
  • Once battery is lifted out and removed, proper dispose of the old battery.
  • Each screw is 0.5 cm in length and 0.5 cm in diameter.

Remove the six screws holding in the battery with a Phillips #0 screwdriver.

Once battery is lifted out and removed, proper dispose of the old battery.

Each screw is 0.5 cm in length and 0.5 cm in diameter.

Step 6

              CPU Fan
  • Using a Phillips #0 screwdriver remove the six screws holding the CPU Fan and Heatsink in place.
  • All six screws are 0.4 cm in length and have a 0.5 cm head diameter.

Using a Phillips #0 screwdriver remove the six screws holding the CPU Fan and Heatsink in place.

All six screws are 0.4 cm in length and have a 0.5 cm head diameter.

Step 7

  • Next, carefully remove the sliding connector that connect the CPU Fan and the laptop together using the tweezers.

Next, carefully remove the sliding connector that connect the CPU Fan and the laptop together using the tweezers.

Step 8

  • Remove the CPU Fan and Heatsink by simply lifting upwards.

Remove the CPU Fan and Heatsink by simply lifting upwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Scott Santiago

Member since: 10/17/2017

534 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       UMass Dartmouth, Team S1-G1, Simcock Fall 2017                        

                                                  Member of UMass Dartmouth, Team S1-G1, Simcock Fall 2017 



                    UMASSD-SIMCOCK-F17S1G1                     


                                            3 Members                     


                                            5 Guides authored