Difficulty
Moderate
Steps
10
Time Required
10 - 15 minutes
Sections
1
- Track Pad
- 10 steps
Flags
0
BackASUS Q324UA-BHI7T17
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Track Pad
- Remove all ten 5mm screws from the backplate using a Phillips #0 Screwdriver.
Remove all ten 5mm screws from the backplate using a Phillips #0 Screwdriver.
1024
Step 2
- Carefully remove the backplate using the plastic opening tool.
Carefully remove the backplate using the plastic opening tool.
Step 3
- Lift up the back plate and slide it to the back of the computer to remove.
Lift up the back plate and slide it to the back of the computer to remove.
Step 4
- Disconnect the battery from the laptop in the upper left side of the battery, using tweezers.
Disconnect the battery from the laptop in the upper left side of the battery, using tweezers.
Step 5
- Remove the six 5 mm screws holding the battery using a Phillips #0 screwdriver.
Remove the six 5 mm screws holding the battery using a Phillips #0 screwdriver.
Step 6
- Carefully remove the battery using the plastic opening tool.
Carefully remove the battery using the plastic opening tool.
Step 7
- Disconnect the trackpad from the motherboard using tweezers.
- The white tab flips up.
Disconnect the trackpad from the motherboard using tweezers.
The white tab flips up.
Step 8
- Remove the two 5mm screws holding in the trackpad using a Phillips #0 screwdriver.
Remove the two 5mm screws holding in the trackpad using a Phillips #0 screwdriver.
Step 9
- Remove adhesive tape tethering the trackpad to the motherboard with tweezers.
Remove adhesive tape tethering the trackpad to the motherboard with tweezers.
Step 10
- Carefully remove the trackpad using the plastic opening tool.
- Lift up and side track toward the back of the computer to remove.
Carefully remove the trackpad using the plastic opening tool.
Lift up and side track toward the back of the computer to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Gabriel survance
Member since: 04/01/2019
343 Reputation
2 Guides authored
Badges:
5
+2 more badges
Team
IUPUI, Team S2-G2, Harley Spring 2019
Member of IUPUI, Team S2-G2, Harley Spring 2019
IUPUI-HARLEY-S19S2G2
3 Members
2 Guides authored
