Difficulty
Moderate
Steps
7
Time Required
15 minutes
Sections
2
- Battery
- 3 steps
- RAM
- 4 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackASUS Q400A-BHI7N03
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn off the laptop.
- Disconnect the charging cable from the laptop.
- Failure to unplug the cable could result in electric shock.
- Flip the laptop over so that it is upside down.
- The slightly raised area is the battery.
- Orient the laptop so that the battery is away from you.
Turn off the laptop.
Disconnect the charging cable from the laptop.
Failure to unplug the cable could result in electric shock.
Flip the laptop over so that it is upside down.
The slightly raised area is the battery.
Orient the laptop so that the battery is away from you.
1024
Step 2
- In the top right corner, push the tab to the right to the unlocked position.
In the top right corner, push the tab to the right to the unlocked position.
Step 3
- Find the tab in the top left corner. With one finger, pull the tab to the left to the unlocked position.
- While holding this tab in the unlocked position, gently pull the battery away from you.
Find the tab in the top left corner. With one finger, pull the tab to the left to the unlocked position.
While holding this tab in the unlocked position, gently pull the battery away from you.
Step 4
RAM
- Flip the laptop so that it is upside down and locate a screw near the middle of the laptop. Remove the 8 mm PH0 screw.
Flip the laptop so that it is upside down and locate a screw near the middle of the laptop. Remove the 8 mm PH0 screw.
Step 5
- Use a metal opening tool, to remove the L shaped section. To avoid breaking the plastic, alternate the sides where you pry.
Use a metal opening tool, to remove the L shaped section. To avoid breaking the plastic, alternate the sides where you pry.
Step 6
- The RAM is located in the top of the section you uncovered.
- Identify the two metal tabs on both sides of the RAM.
- Gently push both tabs outwards at the same time. The RAM will pop up.
- Carefully pull the RAM out.
The RAM is located in the top of the section you uncovered.
Identify the two metal tabs on both sides of the RAM.
Gently push both tabs outwards at the same time. The RAM will pop up.
Carefully pull the RAM out.
Step 7
- To put RAM back in, lineup the RAM with the plastic holder.
- Slide it into the slot at a 30 degree angle and push down until it clicks into place.
To put RAM back in, lineup the RAM with the plastic holder.
Slide it into the slot at a 30 degree angle and push down until it clicks into place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Matthew Gold
Member since: 01/19/2017
401 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
UC Davis, Team 1-4, Rodger Winter 2017
Member of UC Davis, Team 1-4, Rodger Winter 2017
UCD-RODGER-W17S1G4
5 Members
4 Guides authored
rockygc1985 - Oct 23, 2018
Reply
Hello there ! I got a question. What type of ram should I buy to replace my Asus ? I trying to upgrade to 16 gb
John H - Nov 26, 2021
Reply
If I only have 1 stick of 4gb, and assuming I won’t be getting more, does it matter which slot I place it? Top or bottom (closer to the motherboard) ? Thanks ahead of time!