Asus Q405U Wifi Card Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          25 - 30 minutes            

Sections

3

• Back Cover
• 3 steps
• Battery
• 2 steps
• Wifi Card
• 1 step

Flags

5

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackASUS Q405U

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Using the Phillips #1 screwdriver, remove eleven (11) 1.5 mm screws from the back cover.

Using the Phillips #1 screwdriver, remove eleven (11) 1.5 mm screws from the back cover.

1024

Step 2

• Pull the back cover off of your laptop. Use a spudger to help pry it off of the device.

Pull the back cover off of your laptop. Use a spudger to help pry it off of the device.

Step 3

• Disconnect the 4 wires attached from the keyboard side of laptop to the screen side of laptop by pulling them out of their sockets on one end (as shown in picture).

Disconnect the 4 wires attached from the keyboard side of laptop to the screen side of laptop by pulling them out of their sockets on one end (as shown in picture).

Step 4

              Battery               

• Using the Phillips #1 screwdriver, remove the four 1.5 mm screws securing the battery to the device.

Using the Phillips #1 screwdriver, remove the four 1.5 mm screws securing the battery to the device.

Step 5

• Once all screws are removed, lift the battery out from the base of the computer.

Once all screws are removed, lift the battery out from the base of the computer.

Step 6

              Wifi Card               

• Using the Phillips #1 screwdriver, remove the 0.8 mm screw securing the Wi-Fi card to the device.

Using the Phillips #1 screwdriver, remove the 0.8 mm screw securing the Wi-Fi card to the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Jeremiah Baselice                     

Member since: 10/25/2021

521 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       UMass Dartmouth, Team 2-8, Sinclaire Fall 2021                        

                                                  Member of UMass Dartmouth, Team 2-8, Sinclaire Fall 2021 



                    UMASSD-SINCLAIRE-F21S2G8                     


                                            4 Members                     


                                            5 Guides authored