Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes            

Sections

1

  • Hard Drive
  • 6 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

  • BackAsus Q500A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hard Drive               
  • Flip device onto backside

Flip device onto backside

1024

Step 2

  • Use a J0 screwdriver bit to remove both screws on the back-plate, found at the bottom of device.
  • Remove back-plate.
  • Note: Use prying tool if your having issues lifting back-plate.

Use a J0 screwdriver bit to remove both screws on the back-plate, found at the bottom of device.

Remove back-plate.

Note: Use prying tool if your having issues lifting back-plate.

Step 3

  • Remove 4 screws from the metal hard-drive case. There will be one in each corner.
  • Remove the hard-drive case from the device.

Remove 4 screws from the metal hard-drive case. There will be one in each corner.

Remove the hard-drive case from the device.

Step 4

  • Remove the hard-drive. It will be connected to the integrated sata-port in the device.

Remove the hard-drive. It will be connected to the integrated sata-port in the device.

Step 5

  • Place hard-drive into slot and connect to the integrated sata port.
  • Place hard drive case back on top of the new hard-drive.
  • Screw in the four screws on the hard-drive case.

Place hard-drive into slot and connect to the integrated sata port.

Place hard drive case back on top of the new hard-drive.

Screw in the four screws on the hard-drive case.

Step 6

  • Place back-plate back on device.
  • Screw in the 2 screws on the back of the plate.

Place back-plate back on device.

Screw in the 2 screws on the back of the plate.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    cameron                     

Member since: 02/15/2017

319 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team 12-5, Eyestone Spring 2017                        

                                                  Member of USF Tampa, Team 12-5, Eyestone Spring 2017 



                    USFT-EYESTONE-S17S12G5                     


                                            3 Members                     


                                            3 Guides authored