Difficulty
Moderate
Steps
6
Time Required
5 - 10 minutes
Sections
2
- Back Panel
- 3 steps
- Hard Drive
- 3 steps
Flags
0
BackAsus Q501LA-BBI6T03
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Ensure the laptop is powered down before continuing.
- Use a Phillips #0 screwdriver to remove the ten 3mm Phillips head screws on the base of the laptop.
Ensure the laptop is powered down before continuing.
Use a Phillips #0 screwdriver to remove the ten 3mm Phillips head screws on the base of the laptop.
1024
Step 2
- Use the spudger to pry open the rear cover at either hinge.
Use the spudger to pry open the rear cover at either hinge.
Step 3
- Grab the cover with your fingers and gently lift it away from the board.
- Be careful not to break any tabs on the cover when lifting it off.
Grab the cover with your fingers and gently lift it away from the board.
Be careful not to break any tabs on the cover when lifting it off.
Step 4
Hard Drive
- Remove the four 3mm Phillips #0 screws shown.
Remove the four 3mm Phillips #0 screws shown.
Step 5
- Take hard drive out of the port by sliding the component to the left.
- There is only one way it comes out of the connector. If it seems too hard to push out you are probably going the wrong way.
Take hard drive out of the port by sliding the component to the left.
There is only one way it comes out of the connector. If it seems too hard to push out you are probably going the wrong way.
Step 6
- Once the hard drive has been removed from the connector, use your thumb to get under and lift the hard drive out.
Once the hard drive has been removed from the connector, use your thumb to get under and lift the hard drive out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 4 other contributors
Aodhan Arias
Member since: 01/25/2017
288 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 8-1, Banghart Winter 2017
Member of Cal Poly, Team 8-1, Banghart Winter 2017
CPSU-BANGHART-W17S8G1
3 Members
6 Guides authored