Difficulty
Easy
Steps
4
Time Required
5 - 8 minutes
Sections
2
- Back Panel
- 3 steps
- RAM
- 1 step
Flags
0
BackAsus Q501LA-BBI6T03
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Ensure the laptop is powered down before continuing.
- Use a Phillips #0 screwdriver to remove the ten 3mm Phillips head screws on the base of the laptop.
Ensure the laptop is powered down before continuing.
Use a Phillips #0 screwdriver to remove the ten 3mm Phillips head screws on the base of the laptop.
1024
Step 2
- Use the spudger to pry open the rear cover at either hinge.
Use the spudger to pry open the rear cover at either hinge.
Step 3
- Grab the cover with your fingers and gently lift it away from the board.
- Be careful not to break any tabs on the cover when lifting it off.
Grab the cover with your fingers and gently lift it away from the board.
Be careful not to break any tabs on the cover when lifting it off.
Step 4
RAM
- Press down the metal tabs on both sides of the RAM.
- The tabs are spring loaded and the RAM will pop up immediately.
Press down the metal tabs on both sides of the RAM.
The tabs are spring loaded and the RAM will pop up immediately.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Tanner
Member since: 01/25/2017
276 Reputation
2 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 8-1, Banghart Winter 2017
Member of Cal Poly, Team 8-1, Banghart Winter 2017
CPSU-BANGHART-W17S8G1
3 Members
6 Guides authored
