Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackAsus Q502LA-BSI5T14
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Ensure your device is powered off before starting.
- Flip the laptop over and remove the ten 10 mm Phillips #1 screws securing the back panel.
Ensure your device is powered off before starting.
Flip the laptop over and remove the ten 10 mm Phillips #1 screws securing the back panel.
1024
Step 2
- Carefully insert a plastic opening tool under one corner of the back panel.
- Slide the tool along the seam to gently pry the panel up and away from the device.
Carefully insert a plastic opening tool under one corner of the back panel.
Slide the tool along the seam to gently pry the panel up and away from the device.
Step 3
- The battery is the large L-shaped block.
- Remove the five 5.5 mm Phillips #1 screws securing it.
The battery is the large L-shaped block.
Remove the five 5.5 mm Phillips #1 screws securing it.
Step 4
- Using a plastic opening tool, lift the battery straight upward to remove it.
- There are a series of eight small wires connecting the battery to the motherboard. Make sure you gently lift the battery straight up to disconnect these wires and prevent damage.
Using a plastic opening tool, lift the battery straight upward to remove it.
There are a series of eight small wires connecting the battery to the motherboard. Make sure you gently lift the battery straight up to disconnect these wires and prevent damage.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 2 other contributors
Mary Kounelas
Member since: 09/25/2017
715 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team S4-G1, Eyestone Fall 2017
Member of USF Tampa, Team S4-G1, Eyestone Fall 2017
USFT-EYESTONE-F17S4G1
4 Members
5 Guides authored
Berta Stoffel - Apr 6, 2020
Reply
Got as far as the removal from wires. How is that done. A total newbie. I just lifted the battery slightly. Would this help with the static or do I totally need to remove the battery? Laptop shows battery is almost fully charged. There is not a green light.
jsbenami - Dec 29, 2022
Reply
Mine has no green light at first but after battery reaches full state it is there. However annoyingly flickers (screen and all) between charge state and discharging at full. Luckily seems to work fine across the whole range of charging. Can’t believe this Q502LA is still holding on after 8 years :) Wondering if there is any battery drive/update?