Difficulty
Moderate
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Fan
- 4 steps
Flags
0
BackAsus Q502LA-BSI5T14
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Fan
- Make sure your device is powered off before you begin.
- Flip the laptop over and remove the ten 11 mm Phillips #1 screws securing the back panel.
Make sure your device is powered off before you begin.
Flip the laptop over and remove the ten 11 mm Phillips #1 screws securing the back panel.
1024
Step 2
- Carefully insert a plastic opening tool under one corner of the back panel.
- Slide the tool along the seam to gently pry the panel up and away from the device.
Carefully insert a plastic opening tool under one corner of the back panel.
Slide the tool along the seam to gently pry the panel up and away from the device.
Step 3
- Remove the eight 5 mm Phillips #1 screws securing the fan and copper piece to the motherboard.
- Remove the wires by gently pulling them out.
Remove the eight 5 mm Phillips #1 screws securing the fan and copper piece to the motherboard.
Remove the wires by gently pulling them out.
Step 4
- Gently lift the fan up and away from the laptop.
Gently lift the fan up and away from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Mary Kounelas
Member since: 09/25/2017
715 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team S4-G1, Eyestone Fall 2017
Member of USF Tampa, Team S4-G1, Eyestone Fall 2017
USFT-EYESTONE-F17S4G1
4 Members
5 Guides authored
