Difficulty

Moderate

Steps

6

Time Required

                          20 minutes

Sections

2

  • Battery Replacement
  • 3 steps
  • Battery
  • 3 steps

Flags

0

  • BackAsus Q503UA-BSI5T17

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Be sure to power off your device prior to starting the guide.

What you need

Step 1

              Battery Replacement
  • Flip the computer upside down. In order to ensure that the correct side is up, you should be able to read the sticker that indicates the serial number on the bottom.

Flip the computer upside down. In order to ensure that the correct side is up, you should be able to read the sticker that indicates the serial number on the bottom.

1024

Step 2

  • Remove the ten circled screws along the perimeter of the laptop with a Phillips #0 screwdriver.

Remove the ten circled screws along the perimeter of the laptop with a Phillips #0 screwdriver.

Step 3

  • Starting from the top right corner, use a plastic prying tool to separate the cover from the laptop. Use light pressure to prevent the plastic from breaking.
  • You should feel the frame coming loose. If necessary, use spacers to keep the frame from locking back into place.
  • Repeat the above step around the laptop until you are able to lift the cover.

Starting from the top right corner, use a plastic prying tool to separate the cover from the laptop. Use light pressure to prevent the plastic from breaking.

You should feel the frame coming loose. If necessary, use spacers to keep the frame from locking back into place.

Repeat the above step around the laptop until you are able to lift the cover.

Step 4

              Battery
  • Remove the five screws holding the battery in place using a Phillips #0 screwdriver.
  • Screw locations are approximate. If you find screws to be located elsewhere, please update this step with their correct locations.

Remove the five screws holding the battery in place using a Phillips #0 screwdriver.

Screw locations are approximate. If you find screws to be located elsewhere, please update this step with their correct locations.

Step 5

  • Disconnect the battery connection.

Disconnect the battery connection.

Step 6

  • Grab and lift the battery from the top right-hand side.
  • If all screws are removed, it should come out with no struggle at all.

Grab and lift the battery from the top right-hand side.

If all screws are removed, it should come out with no struggle at all.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 7 other contributors 


                    Roberto Apodaca

Member since: 08/26/2019

330 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Gateway, Team S1-G4, Saknee Fall 2019                        

                                                  Member of Gateway, Team S1-G4, Saknee Fall 2019 



                    GCC-SAKNEE-F19S1G4                     


                                            4 Members                     


                                            5 Guides authored