Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Back Panel
- 5 steps
Flags
0
BackAsus Q504UA-BHI5T13
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Ensure that the laptop is off so you do not shock yourself.
Ensure that the laptop is off so you do not shock yourself.
1024
Step 2
- Use the T5 Torx screwdriver to remove the ten 1mm screws located around the back cover.
Use the T5 Torx screwdriver to remove the ten 1mm screws located around the back cover.
Step 3
- Remove the two rubber pads nearest to you using the metal spudger.
Remove the two rubber pads nearest to you using the metal spudger.
Step 4
- Use the Phillips #0 screwdriver to remove the two 4mm screws that are under the rubber pads.
Use the Phillips #0 screwdriver to remove the two 4mm screws that are under the rubber pads.
Step 5
- Insert any of the plastic opening tools into the seam to separate the back cover (it is recommended to start at the corner of the hinges). If you did it right, then the cover should pop off.
- Be careful as you may damage the tabs.
Insert any of the plastic opening tools into the seam to separate the back cover (it is recommended to start at the corner of the hinges). If you did it right, then the cover should pop off.
Be careful as you may damage the tabs.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 5 other contributors
Johnathan Teav
Member since: 10/02/2017
450 Reputation
3 Guides authored
Badges:
10
+7 more badges
Team
USF Tampa, Team S10-G4, Thompson Fall 2017
Member of USF Tampa, Team S10-G4, Thompson Fall 2017
USFT-THOMPSON-F17S10G4
4 Members
5 Guides authored
