Asus Q504Ua Bhi5T13 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          15 - 20 minutes            

Sections

2

• Back Panel
• 5 steps
• Battery
• 4 steps

Flags

0

• BackAsus Q504UA-BHI5T13

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Ensure that the laptop is off so you do not shock yourself.

Ensure that the laptop is off so you do not shock yourself.

1024

Step 2

• Use the T5 Torx screwdriver to remove the ten 1mm screws located around the back cover.

Use the T5 Torx screwdriver to remove the ten 1mm screws located around the back cover.

Step 3

• Remove the two rubber pads nearest to you using the metal spudger.

Remove the two rubber pads nearest to you using the metal spudger.

Step 4

• Use the Phillips #0 screwdriver to remove the two 4mm screws that are under the rubber pads.

Use the Phillips #0 screwdriver to remove the two 4mm screws that are under the rubber pads.

Step 5

• Insert any of the plastic opening tools into the seam to separate the back cover (it is recommended to start at the corner of the hinges). If you did it right, then the cover should pop off.
• Be careful as you may damage the tabs.

Insert any of the plastic opening tools into the seam to separate the back cover (it is recommended to start at the corner of the hinges). If you did it right, then the cover should pop off.

Be careful as you may damage the tabs.

Step 6

              Battery               

• Once the back cover is removed, have the laptop facing upside down with the hinges facing toward you.

Once the back cover is removed, have the laptop facing upside down with the hinges facing toward you.

Step 7

• Use the Phillips #0 screwdriver to remove the five 4mm screws around the battery.

Use the Phillips #0 screwdriver to remove the five 4mm screws around the battery.

Step 8

• Use the small plastic opening tool to remove the ZIF Connector on the right side of the battery.

Use the small plastic opening tool to remove the ZIF Connector on the right side of the battery.

Step 9

• Remove the battery from the device.

Remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Brielle                     

Member since: 10/02/2017

193 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       USF Tampa, Team S10-G4, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S10-G4, Thompson Fall 2017 



                    USFT-THOMPSON-F17S10G4                     


                                            4 Members                     


                                            5 Guides authored                     

Rick Grinstead - Jan 3, 2021

Reply

Anyone know where to purchase this battery. I’ve ordered off ebay only to get a non-fitting battery and have scoured the internet only to come up empty handed. Any help appreciated.